Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 73 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Voice Mode

MOTIF-RACK XS Owner’s Manual

Basic Structure

Voice

MultiUtility

Reference

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

Element Edit

If you wish to edit the sounds that make up a Voice and the detailed parameters that determine the sound, such as Oscillator,

Pitch, Filter, Amplitude, and EG (Envelope Generator), use the MOTIF-RACK XS Editor to edit the parameters of the individual

Elements. These parameters can be edited only on the MOTIF-RACK XS Editor, and not the device itself. For details on each

parameter setting window, refer to the MOTIF-RACK XS Editor Owner’s Manual.

OSC (Oscillator)

Element Switch 1 – 8 Determines whether each Element is on or off. When this is set to off, the corresponding Elements

will not sound.

Settings: off (inactive), on (active)

Wave Bank

Category

Number

Name

Determines the Waveform assigned to the Element. Preset Banks are available for the Waveform

Bank. For details about Preset Waveforms, see the Waveform list in the separate Data List.

XA Control

(Expanded Articulation Control)

Expanded Articulation (XA) is a special feature of the MOTIF-RACK XS that provides greater

performance ﬂexibility and realism. This parameter determines how the XA feature of the Element

works. Try setting this parameter referring to the ﬁve types of XA Control described in the Basic

Structure on page 51. You can obtain the desired sound and expressive control depending on your

performance articulation by assigning the same Element Group to those Elements having the same

type of XA Control.

Settings: normal, legato, key off sound, wave cycle, wave random, all AF off, AF 1 on, AF 2 on

normal

When this is selected, the Element will sound normally each time a Note On message is received.

legato

When this is selected and the Mono mode is selected, an alternate Element (different from the one used when XA Control is

set to “normal”) will be played when you play an external keyboard in legato fashion (playing the next note of a single-note

line or melody before releasing the previous note).

key off sound

When this is selected, the Element will sound each time a Note Off message is received.

wave cycle

When this is selected for multiple Elements, each Element sounds alternately according to its numerical order each time a

Note On message is received. (In other words, receiving the ﬁrst Note On message will sound Element 1, the second Note

On message Element 2, and so on.)

wave random

When this is selected for multiple Elements, each Element will sound randomly each time a Note On message is received.

all AF off

When this is selected, the Element will sound when both of the A, Func [1] and [2] buttons (ASSIGNABLE FUNCTION

buttons) are turned off.

AF 1 on

When this is selected, the Element will sound when the A. Func [1] button (ASSIGNABLE FUNCTION [1] button) is turned on.

AF 2 on

When this is selected, the Element will sound when the A. Func [2] button (ASSIGNABLE FUNCTION [2] button) is turned on.

Elm Group

(Element Group)

Determines the XA Control group so that the Elements of the same group are called up in order or

randomly. Assign the same group number to the Elements having the same type of XA Control. The

setting here is not available when the XA Control parameters of all Elements are set to “normal.”

Settings: 1 – 8

Key on Delay Determines the time (delay) between the moment that a Note On message is received and the point

at which the sound is played. The higher the value, the longer the delay time.

Settings: 0 – 127

Tempo Sync

(Delay Tempo Sync)

Determines whether or not the Key On Delay parameter is synchronized to the tempo of the

Arpeggio.

Settings: off (not synchronized), on (synchronized)

Tempo

(Delay Tempo)

Determines the timing of the Key On Delay only when Tempo Sync is set to “on.”

Settings: 16th, 8th/3 (eighth-note triplets), 16th. (dotted sixteenth notes), 8th, 4th/3 (quarter-note triplets), 8th. (dotted

eighth notes), 4th (quarter notes), 2nd/3 (half-note triplets), 4th. (dotted quarter notes), 2nd (half notes), whole/3

(whole-note triplets), 2nd. (dotted half notes), 4th x 4 (quarter-note quadruplets; four quarter notes to the beat),

4th x 5 (quarter-note quintuplets; ﬁve quarter notes to the beat), 4th x 6 (quarter-note sextuplets; six quarter notes

to the beat), 4th x 7 (quarter-note septuplets; seven quarter notes to the beat), 4th x 8 (quarter-note octuplets;

eight quarter notes to the beat)

Vel Cross Fade

(Velocity Cross Fade)

This determines how gradually the sound of an Element decreases in volume in proportion to the

distance of velocity changes outside the Velocity Limit setting. A setting of 0 produces no sound

outside the Velocity Limit. The higher the value, the more gradual the level decreases. The practical

application of this parameter is to create natural-sounding velocity cross fades, in which different

Elements (Waveforms) change gradually depending on how strongly or softly you play.

Settings: 0 – 127

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info