Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 84 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Voice Mode

MOTIF-RACK XS Owner’s Manual

Basic Structure

Reference

Voice

Multi Utility

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

Key Edit

If you wish to edit the sounds that make up a Voice and the detailed parameters that determine the sound, such as Oscillator,

Pitch, Filter, Amplitude, and EG (Envelope Generator), call up the Key Edit display. These parameters can be edited only on the

MOTIF-RACK XS Editor, and not the device itself. For details on each parameter setting window, refer to the MOTIF-RACK XS

Editor Owner’s Manual.

Chorus Ins Send

(Insertion Chorus Send)

When the Key Out parameter is set to “Ins A” or “Ins B,” this determines the level of the Drum Key

sound (output from Insertion Effect A or B) that is sent to the Chorus effect.

Settings: 0 – 127

Reverb Ins Send

(Insertion Reverb Send)

When the Key Out parameter is set to “Ins A” or “Ins B,” this determines the level of the Drum Key

sound (output from Insertion Effect A or B) that is sent to the Reverb effect.

Settings: 0 – 127

OSC (Oscillator)

Key Determines the desired drum key. You can also select the key by clicking the keyboard on the

MOTIF-RACK XS Editor.

Settings: C0 – C6

Key Sw

(Key Switch)

Determines whether the currently selected Key is used or not. When this is set to off, the currently

edited Key will not sound.

Settings: off (inactive), on (active)

Wave Bank

Category

Number

Name

Determines the Waveform assigned to the Drum Key. Only Preset Banks are available for the

Waveform Bank. For details about Preset Waveforms, see the Waveform list in the separate Data

List.

Assign Mode This is useful when two or more instances of the same note are received nearly simultaneously, or

without a corresponding Note Off message. To allow playback of each instance of the same note,

set this to “multi.” In general, you should probably set this to “multi”—especially for tambourine and

cymbal sounds that you would want to ring out to their full decay, when playing them multiple times

in succession. Please keep in mind that the “multi” setting consumes the overall polyphony and it

may cause sounds to be cut off.

Settings: single, multi

single................................. When this is set to “single” and double playback of the same note are transmitted to the internal

tone generator, the ﬁrst note will be stopped before the next note is sounded.

multi................................... When this is set to “multi” and double playback of the same note are transmitted to the internal

tone generator, all notes are sounded simultaneously.

Receive Note Off Determines whether MIDI Note Off messages are received by each Drum Key. This should be set to

on when the selected Drum Key has a sustained, non-decaying sound (such as a snare roll), so that

you can stop the sound by releasing the note.

Settings: off, on

Alternate Group Sets the Alternate Group to which the Wave is assigned. In a real drum kit, some drum sounds

cannot physically be played simultaneously, such as open and closed hi-hats. You can prevent keys

from playing back simultaneously by assigning them to the same Alternate Group. You can also

select “off” here if you wish to allow the simultaneous playback of sounds.

Settings: off, 1 – 127

Ins Effect Output

(Insertion Effect Output)

Determines which Insertion Effect (A or B) is used to process each individual Drum Key, and which

is bypassed (thru). This parameter is same as Key Out (page 83) in the Effect section in Drum Voice

Common Edit. Making a setting here automatically changes the setting of that parameter as well.

Settings: thru (through), Ins A (Insertion A), Ins B (Insertion B)

Reverb Send

(Key Reverb Send)

Determines the level of the Drum Key sound (the bypassed signal) that is sent to Reverb effect. The

setting here is available only when the “Ins Effect Output” parameter is set to “thru.” This parameter

is same as Reverb Send (page 83) in the Effect section in Drum Voice Common Edit. Making a

setting here automatically changes the setting of that parameter as well.

Settings: 0 – 127

Chorus Send

(Key Chorus Send)

Determines the level of the Drum Key sound (the bypassed signal) that is sent to Chorus effect. The

setting here is available only when the “Ins Effect Output” parameter is set to “thru.” This parameter

is same as Chorus Send (page 83) in the Effect section in Drum Voice Common Edit. Making a

setting here automatically changes the setting of that parameter as well.

Settings: 0 – 127

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info