Bedienungsanleitung Yamaha MOTIF-RACK XS (Seite 93 von 118) (Englisch)

586891

Zoom out

Zoom in

Vorherige Seite

1/118

Nächste Seite

Multi Mode

MOTIF-RACK XS Owner’s Manual

Basic Structure

Voice

MultiUtility

Reference

The Controls &

Connectors

Setting Up

Listening to

the Sound

Connections

Using a Computer

Quick Guide

Appendix

Gain Determines the level gain for the Frequency (set above), or the amount the selected frequency band

is attenuated or boosted.

Settings: -12.00 dB – +0.00 dB – +12.00 dB

(Bandwidth)

This varies the signal level at the Frequency setting

to create various frequency curve characteristics.

The higher the setting the smaller the Q (Bandwidth).

The lower the setting, the greater the Q (Bandwidth).

Settings: 0.1 – 12.0

n When the Shape parameters of the Low and High are

set to “shelv,” the “Q” parameters of Low and High are

not available.

5 Control

Assign 1 Value

Assign 2 Value

Determines the offset value by which the functions assigned to the Assign 1/2 knobs will be shifted

from their original settings. Each parameter can be changed directly via the Knob.

Settings: -64 – +0 – +63

n The functions assigned to the Assign 1/2 Knobs can be set in “Ctrl Set 1 – 6 Src” (page 71) of the Control display.

6 Effect

n This display can be called up by pressing and holding the [EFFECT] button on the front panel.

1 Chorus To Reverb Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect. The higher

the value, the deeper the Reverb that is applied to the Chorus-processed signal.

Settings: 0 – 127

2 Chorus Return Determines the Return level of the Chorus Effect.

Settings: 0 – 127

3 Chorus Pan Determines the pan position of the Chorus effect sound.

Settings: L63 (far left) – C (center) – R63 (far right)

4 Reverb Return Determines the Return level of the Reverb Effect.

Settings: 0 – 127

5 Reverb Pan Determines the pan position of the Reverb effect sound.

Settings: L63 (far left) – C (center) – R63 (far right)

6 Chorus

7 Reverb

8 Master

When the cursor is located here, pressing the [ENTER] button or the Encoder knob calls up the

Effect Parameter display.

Effect Parameters

Switch This parameter is available only for Master Effect.

Settings: off, on

Category

Type

From the Category column, you can select one of the Effect Categories, each of which contains

similar Effect types. From the Type column, you can select one of the Effect Types listed in the

selected Category.

Settings: Details about the Effect categories and the Effect types are described on page 59.

n The “Category” is not edited in the Reverb and the Master effect parameter display because there is only one

Reverb/Master category.

Preset This lets you call up pre-programmed settings for each Effect Type, designed to be used for speciﬁc

applications and situations.

n For details about “Preset” settings, refer to the separate Data List booklet.

Effect Parameter 1 – 16 The effect parameter differs depending on the currently selected effect type. Refer to page 61 for

details about the Effect parameters. Refer to the separate Data List booklet for information on the

parameters for each Effect type.

–

Frequency

12.0

0.1

5874

6 1 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF-RACK XS Seite 93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF-RACK XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info