Bedienungsanleitung Yamaha MOTIF XF6 (Seite 15 von 86) (Englisch)

571280

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

Controls and Functions

9 FOOT SWITCH jacks

For connection of an optional FC3/FC4/FC5 Footswitch to the

SUSTAIN jack and a FC4/FC5 Footswitch to the

ASSIGNABLE jack. When connected to the SUSTAIN jack,

the Footswitch controls sustain. When connected to

ASSIGNABLE, it can control one of various different

assignable functions. The function assignment can be set in

the Voice Edit mode.

For more information, refer to “Voice mode” in the Reference

Manual.

) FOOT CONTROLLER jacks

For connection of optional foot controllers (FC7 and FC9).

Each jack lets you continuously control one of various

different assignable functions—such as volume, tone, pitch,

or other aspects of the sound. The function assignment can

be set in the Voice Edit mode.

For more information, refer to “Voice mode” in the Reference

Manual.

! ASSIGNABLE OUT L and R jacks

Line level audio signals are output from this instrument via

these phone jacks (1/4" mono phone plug). These outputs

are independent of the main output (at the L/MONO and R

jacks below), and can be freely assigned to any of the Drum

Voice keys or the Parts. This lets you route specific Voices or

sounds for processing with a favorite outboard effect unit.

The Parts which can be assigned to these jacks are as

follows:

• Audio Part in the Voice mode

• Drum Voice key to which the drum/percussion instrument is

assigned

• Any Part of a Performance*

• Any Part of a Song*

• Any Part of a Pattern*

*Including the Audio Input Part

The Part assignment above can be set via the Output Select parameter.

For details, refer to the Reference Manual.

@ OUTPUT L/MONO and R jacks

Line level audio signals are output via these phone jacks. For

monophonic output, use only the L/MONO jack.

# PHONES (Headphone) jack (page 16)

This standard stereo phones jack is for connection to a set of

stereo headphones.

$ A/D INPUT jacks (page 47)

External audio signals can be input via these phone jacks

(1/4" mono phone plug). Various devices such as

microphone, guitar, bass, CD player, synthesizer can be

connected to these jacks and their audio input signal can be

sounded as the Audio Part of the Voice, Performance, Song,

or Pattern. In the Sampling mode (page 47), these jacks are

used for capturing audio data as samples. In addition, you

can use the special Vocoder feature by connecting a

microphone to this L jack and inputting your Voice to the

microphone.

Use 1/4" mono phone plugs. For stereo signals (such as from

audio equipment), use both jacks. For mono signals (such

as from a microphone or guitar), use only the L jack.

% GAIN knob (page 50)

For adjusting the input gain of the audio at the A/D INPUT

jacks (above). Depending on the connected device

(microphone, CD player, etc.), you may need to adjust this

for optimum level.

7 #%89)!@ $

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF6 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info