Bedienungsanleitung Yamaha MOTIF XF6 (Seite 40 von 86) (Englisch)

571280

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

Creating an original Song

NOTE The Song location at which you edit or input the event is

indicated by MEAS (measure), BEAT and CLOCK. A

quarter-note (one beat when the time signature is set to “4/

4”) consists of 480 divisions. The length of each note (gate

time) is indicated by Beat and Clock. For example, 001:000

is equivalent to a quarter note and 000:240 is equivalent to

an 8th note.

4 Turn the data dial to edit the value.

The entire line of the edited event will start flashing. You can

also set the note directly from the keyboard, by holding

down the [SF6] KBD button and pressing the desired note.

5 Press the [ENTER] button to actually enter the

edited data (the entire line of the edited event will

stop flashing).

Repeat steps 3 and 5 to correct other wrong events.

6 After completing editing, press the [EXIT] button to

return back to the Song Play mode.

NOTE To easily delete an unnecessary note, move the cursor to the

corresponding location, then press the [F6] button.

Creating a swing feel—Play Effect

The Play Effect feature lets you alter the rhythm in a variety of

musically useful ways—for example, to take something that

was recorded ‘straight’ and give it a swing feel. Let’s change

the performance you recorded above, and apply a swing

feel to it here.

1 From the Song Play display, press the [F2] button

to call up the Play FX display.

2 Move the cursor to the Quantize Value of Track 1,

then select the 8th note icon.

3 Move the cursor to the Swing Rate of Track 1, then

select “66%.”

This parameter determines the strength or amount of swing

applied. Selecting “66%” delays each of the up beat notes

to triplet values.

NOTE

If you’ve recorded an accompanying part to track 2, make

sure to apply the same settings to this track as well.

After completing the settings, press the [T] (Top) button,

then press the [R] (Play) button to start the Song and listen

to the swing feel in the playback.

Storing the created Song

After recording, make sure to store the created Song to

internal memory by pressing the [STORE] button to call up

the Song Store window.

The operation is basically the same as in the Voice Play

mode

NOTICE

When you execute the Store operation, the settings for the

destination memory will be overwritten. Important data should always

be backed up to a separate storage device.

For more information about the Song, refer to the Song mode

chapter in the Reference Manual.

Measure Beat Clock

Quantize Value of

Track 1

Swing Rate of

Track 1

Applying the Play Effect setting to the actual MIDI

data

The Play Effect setting temporarily changes how the Song

data is played back, but does not actually change the

Song MIDI itself. If you want to save the Play Effect

changes as part of the Song data (for example, as a

Standard MIDI file), you can use the Job operation to

permanently apply the Play Effect settings.

To execute this Job:

1 Press the [JOB] button then [F5] Track button.

2 Move the cursor to “05: Normalize Play Effect” then

press the [ENTER] button.

3 Select the corresponding Track, then press the [ENTER]

button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF6 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info