Bedienungsanleitung Yamaha MOTIF XF8 (Seite 56 von 86) (Englisch)

571282

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

By connecting the MOTIF XF to your computer via USB or IEEE1394, you can use a DAW or sequence software on the computer

to create your own original songs. This section contains an overview on how to use a DAW or sequence software on the

connected computer with the MOTIF XF.

NOTE The acronym DAW (digital audio workstation) refers to music software for recording, editing and mixing audio and MIDI data. The main DAW

applications are Cubase, Logic, SONAR and Digital Performer. Though all of these can be effectively used with the MOTIF XF, for optimum ease of

use we recommend using Cubase when creating songs together with the instrument.

By connecting this instrument to a computer, you can take advantage of the following functions and applications.

• External tone generator for DAW software and MIDI keyboard

• Remote Controller of the DAW software

• More detailed Voice Editing from the computer (MOTIF XF Editor VST)

Using the USB TO HOST terminal

A USB cable and appropriate USB-MIDI Driver are

necessary to connect the MOTIF XF to the computer. Follow

the instructions below. Note that only MIDI data can be

transmitted through a USB cable.

NOTE Since the MOTIF XF has no built-in speakers, you'll need an

external audio system or a set of stereo headphones to properly

monitor it. For details, refer to “Setting Up” on page 16.

1 Download the appropriate USB-MIDI Driver from

our website.

After clicking the Download button, extract the compressed

file.

http://www.global.yamaha.com/download/usb_midi/

NOTE

Information on system requirements is also available at the

above web site.

NOTE The USB-MIDI Driver may be revised and updated without

prior notice. Make sure to check and download the latest

version from the above site.

2 Install the USB-MIDI Driver to the computer.

For instructions on installing, refer to the online Installation

Guide included in the downloaded file package. When

connecting this instrument to a computer in the Installation

procedure, connect the USB cable to the USB TO HOST of

this instrument and the USB terminal of the computer as

shown below.

3 Make sure that the USB TO HOST terminal of this

instrument is enabled.

Press the [UTILITY] button to enter the Utility mode, then

press the [F5] button followed by the [SF2] button to call up

the MIDI display. On this display, set the MIDI In/Out

parameter to “USB.”

4 Press the [STORE] button to store the setting.

Using a Connected Computer

USB

TO DEVICETO HOST

USB terminal

USB cable

USB TO HOST terminal

Rear panel

Notices when using the USB TO HOST terminal

You must observe the following points when connecting

the MOTIF XF to your computer via the USB TO HOST

connector. Failure to do so can cause the instrument and/

or the computer to hang up (freeze), possibly causing

corruption or loss of data. If the computer or MOTIF XF

freezes, turn the power to the MOTIF XF off and then on,

then restart the computer.

• Before connecting the computer to the USB TO HOST

terminal, exit from any power-saving mode of the

computer (such as suspended, sleep, standby).

• Before turning on the power to the instrument, connect

the computer to the USB TO HOST connector.

• Execute the following before turning the power to the

instrument on/off or plugging/unplugging the USB cable

to/from the USB connector.

• Quit any open applications (such as MOTIF XF Editor

VST and sequencer software).

• Make sure that data is not being transmitted from the

instrument. (Data is transmitted only by playing notes

on the keyboard or playing back a song.)

• Leave an interval of at least six seconds between

powering the MOTIF XF on and off, or between

disconnecting and connecting the USB cable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF8 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info