Bedienungsanleitung Yamaha MOTIF XF8 (Seite 61 von 86) (Englisch)

571282

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

Using a Connected Computer

Using the MOTIF XF as an audio

interface

By using the A/D INPUT connector and IEEE1394 connector,

the MOTIF XF can conveniently be used as an audio

interface for your computer. Note that you need install the

optional FW16E for this application.

Setting up the MOTIF XF

1 Set the parameters as below so that the audio

signal input via the A/D INPUT connector is output

via the FW connector to the computer.

In the Voice mode, press the [UTILITY] button to enter the

Utility mode, then press the [F4] button followed by the [SF1]

button to call up the Output display. From this display, move

the cursor to the Output Select of the A/D Input, then select

one of the following settings: “FW1&2” – “FW9&10,”

“FW11&12” and “FW13&14.”

2 Set the parameters as below so that the audio

signal that is output from the computer and input

to the MOTIF XF via the IEEE1394 connector will be

output from the OUTPUT L/R or ASSIGNABLE

OUTPUT L/R connectors.

From the Output display called up in step 1, move the cursor

to the Output Select of the FW, then select “L&R” or “asL&R.”

NOTE

The setting here applies to the audio signals output from FW

ports MOTIF XF6(7, 8) FW L and R of a computer.

3 Press the [STORE] button to store this setting.

Setting up the DAW on the computer

Install the FW Driver and make the proper settings. Select

Yamaha Steinberg FW ASIO (when using an ASIO driver) or

Yamaha Steinberg FW WDM Audio (when using a WDM

driver) as the Audio driver.

NOTE If using Cubase with the MOTIF XF Extension installed, starting

Cubase will set the Audio Driver automatically, allowing you to

easily confirm the Audio Port name.

Remote-controlling the software

(Remote mode)

The MOTIF XF features a highly convenient Remote mode

which lets you control the DAW software and software

synthesizer on your computer via the panel operations of the

MOTIF XF. For example, you can start/stop playback of the

DAW software on the computer by using the Function

buttons and control the song position on the DAW software

by using the data dial, [INC] and [DEC] buttons instead of

using the mouse or keyboard of the computer.

The DAW applications Cubase, Logic Pro, SONAR and

Digital Performer can be controlled by the Remote Control

mode of the MOTIF XF.

This section explains how to control the DAW software from

the MOTIF XF.

What you can do with the Remote

feature

The Remote Control lets you control the following operations.

• You can use the sliders, knobs and buttons of the MOTIF XF to

control the sequencer tracks and mixer channels of the DAW

on the computer.

• You can view the parameter values on the LCD display of the

MOTIF XF as well as on the computer display, since the values

of the controlled parameters are returned back to the MOTIF

XF from the computer.

Display information Remote Control

MOTIF XF

Parameter value

Volume

Remote

Control

Computer

DAW

MOTIF XF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF8 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info