Bedienungsanleitung Yamaha MOTIF XF8 (Seite 64 von 86) (Englisch)

571282

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

In the File mode, you can save/load data such as Voice, Performance, Song, Pattern and Waveform created on this instrument.

To enter the File mode, press the [FILE] button.

This section explains how to save/load all the data on the user memory of this instrument as an “All” file (extension: X3A).

Saving the settings to a USB

storage device

1 Connect a USB storage device to the USB TO

DEVICE terminal of this instrument.

2 Press the [FILE] button to enter the File mode, then

press the [F1] File button.

At the “Device” line, you can confirm that the connected

USB storage device is mounted.

3 Move the path to the desired directory.

The Dir line indicates the current directory name with the

path and the lower box lists the directories and files

belonging to the current directory.

3-1 To go down from the current directory, move the cursor to

the desired directory in the Directory/File list then press

the [ENTER] button.

3-2 To go up from the current directory, move the cursor to the

top line in the Directory/File list then press the [ENTER]

button.

NOTE

If you wish to create a new directory and save the file there,

press the [SF5] New Dir button.

4 Move the cursor to “Type” then select “all.”

5 Press the [SF1] Save button to call up the window

for entering the file name.

6 Enter the file name, then press the [ENTER]

button.

The confirmation message appears.

The file name can contain up to 20 characters.

7 Press the [INC/YES] button to execute the Save

operation.

Loading the settings from a USB

storage device

1 Connect a USB storage device to the USB TO

DEVICE terminal of this instrument.

2 Press the [FILE] button to enter the File mode, then

press the [F1] File button.

At the “Device” line, you can confirm that the connected

USB storage device is mounted.

3 Move the path to the desired directory.

The Dir line indicates the current directory name with the

path and the lower box lists the directories and files

belonging to the current directory.

3-1 To go down from the current directory, move the cursor to

the desired directory in the Directory/File list then press

the [ENTER] button.

3-2 To go up from the current directory, move the cursor to the

top line in the Directory/File list then press the [ENTER]

button.

4 Move the cursor to “Type” then select “all.”

5 Select the file to be loaded.

6 Press the [SF2] Load button (a prompt for

confirmation appears).

Press the [DEC/NO] button to cancel the Load operation.

7 Press the [INC/YES] button to execute the Load

operation.

NOTICE

The Load operation overwrites any data previously existing in the

destination internal memory. Important data should always be saved

to a USB storage device connected to the USB TO DEVICE terminal.

For more information about the File operation, refer to the File

mode chapter in the Reference Manual.

Saving / Loading Data in the File mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF8 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info