Bedienungsanleitung Yamaha MOTIF XF8 (Seite 73 von 86) (Englisch)

571282

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MOTIF XF Owner’s Manual

Troubleshooting

Network connection does not work.

 If you’ve forgotten the password for accessing the MOTIF XF, execute the Factory Set then set the password again.

 When the DHCP server is connected to the network and the DHCP Client parameter is set to “on,” you need not set the IP

address because it is automatically set. When the DHCP server is not connected to the network and you wish to set a specific

IP address, set the DHCP Client parameter to “off,” then set the IP address manually.

 If the network settings do not become active even if you set the related parameters, make sure to press the [ENTER] button

after setting. Then, you will need to press the [STORE] button to store the settings. If you do not store the network settings,

these will be erased after you turn off the power.

 The characters of a file or directory may be garbled when loading the file from the computer drive to the MOTIF XF. If such a

problem occurs, replace the garbled character with the correct one on the MOTIF XF display. Keep in mind that 2-byte

character codes such as Kanji and Kana cannot be shown on the display of the MOTIF XF.

 When “Password is unspecified.” appears after setting the File Server parameter to “on,” make sure to set the Password

before setting the File Server parameter to “on.” This is because the Security parameter has been set to “workgroup” and the

Account and Password are necessary when the files are shared.

MIDI bulk data transmission/reception does not work properly.

 Is the Receive Bulk parameter set to off?

Set the Receive Bulk parameter to on.

 When receiving MIDI bulk data transmitted via the Bulk Dump function and recorded to the external MIDI device, you need to

set the MIDI Device Number to the same value as when transmitting.

 When transmission does not work properly, is the device number of the MIDI instrument connected to the MOTIF XF set to

match the Device Number Parameter in the Utility mode?

Cannot save data to the external USB storage device.

 Is the USB storage device being used write protected? (Write-protect should be set to off for saving data.)

 Is the USB storage device being used properly formatted?

Press the [FILE] button to enter the File mode, then set the device to the USB storage device. Check the amount of currently

available (unused) memory of the USB storage device indicated at the right top of the display.

 Is operation of the USB storage device guaranteed by Yamaha?

For details, see page 65.

[UTILITY]  [F1] General  [SF3] Network  [SF5] Password

[UTILITY]  [F1] General  [SF3] Network  DHCP Client

[UTILITY]  [F1] General  [SF3] Network

[UTILITY]  [F1] General  [SF3] Network  [SF5] Password

[UTILITY]  [F5] Control  [SF2] MIDI  Receive Bulk

[UTILITY]  [F5] Control  [SF2] MIDI  Device Number

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XF8 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info