Bedienungsanleitung Yamaha MOTIF XS7 (Seite 22 von 320) (Englisch)

586887

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Start Guide

Resetting the User Memory to the Initial Factory Settings

MOTIF XS Owner’s Manual

1Press the [FILE] button and [UTILITY] button

simultaneously.

The Demo Load display appears.

2Make sure that the Load Type is set to “all,”

then press the [ENTER] button to load the

Demo data.

A display prompt appears to conﬁrm whether or not the

destination data (Song/Pattern) should be deleted.

nIf you want to load only the Demo Song data, set the Load

Type to “song.” If you want to load only the Demo Pattern

data, set the Load Type to “pattern.”

3Press the [INC/YES] button to execute the

Demo Load operation.

The Demo data is loaded to the Song and Pattern

memory location, then the Song Play Track View display

appears.

nIf you set the Load Type to “pattern” in step 2 above, the

Pattern Play display (page 210) appears after loading.

nFor more information about the Track View display of the Song,

see page 181. For more information about the Pattern Play

display, see page 210.

FILE UTILITY

DEC/NO INC/YES

EXIT

EXECUTE

ENTER

Resetting the User Memory to

the Initial Factory Settings

The original factory settings of this synthesizer’s User

Memory can be restored as follows.

nWhen connecting a computer to the MOTIF-RACK XS

via a IEEE1394 cable, disable the driver used for this

connection beforehand, and follow the procedure below

to execute Factory Set.

When the factory settings are restored, all the Voice,

Performance, Song, Pattern, and system settings in the

Utility mode you created will be erased. Make sure you are

not overwriting any important data. Be sure to save all

important data to your USB storage device or a computer on

the network before executing this procedure (page 278).

1 Press the [UTILITY] button then the [JOB]

button to call up the Factory Set display

(page 269).

2 Press the [ENTER] button.

The display prompts you for conﬁrmation. Press

the [DEC/NO] button to cancel the Load operation.

3 Press the [INC/YES] button to execute the

Factory Set.

After the Factory Set has been completed, a

“Completed” message appears and operation

returns to the original display.

For Factory Set operations that take longer to process, you

will see the message “Now executing Factory Set…” during

processing. While such a message is shown on the display,

never attempt to turn off the power while data is being

written to Flash ROM. Turning the power off in this state

results in loss of all user data and may cause the system to

freeze (due to corruption of data in the Flash ROM). This

means that this synthesizer may not be able to start up

properly, even when turning the power on next time.

When entering the checkmark to the box of the Power On

Auto Factory Set and executing the Factory Set, the Factory

Set will automatically be executed each time turning the

power on. Keep in mind that this also means that your

original data in Flash ROM will be erased each time you turn

on the power. Therefore, the checkmark of this box should

normally be removed. If you remove the checkmark of this

box and execute the Factory Set, the Factory Set will not be

executed when turning the power on next time.

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info