Bedienungsanleitung Yamaha MOTIF XS7 (Seite 26 von 320) (Englisch)

586887

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Step 2: Selecting and Playing a Voice

MOTIF XS Owner’s Manual

Start Guide

Using the Knobs

Try using the Knobs with your left hand while playing the keyboard with your right with the Voice A01 “Full Concert Grand.”

1Press the [SELECTED PART CONTROL] button

a few times so that the TONE 1 lamp lights.

The Control Function window appears when a display

other than the Voice Play display is shown.

Holding the [SELECTED PART CONTROL] button for a

while will light the lamp of the TONE1 lamp.

2Rotate the Knob 1 (at the far left) while playing

keyboard.

Tur ning the knob clockwise results in a brighter sound,

while turning it counterclockwise results in a softer,

mufﬂed sound. The sound changes in this way because

Knob 1 is assigned to the Cutoff Frequency parameter

(labeled CUTOFF in the matrix above Knob 1 and next

to TONE 1).

nThe functions assigned to each of Knobs and current

values are shown in the display.

3Press the [SELECTED PART CONTROL] button

a few times so that the TONE 2 lamp lights,

then rotate the Knob (at the far right).

The CHORUS (as printed above the Knob) is applied to

the current Voice.

nA red point on the Knob or Slider graphic indicates the

current value to which the Knob or Slider is set. Moving

the Knob or Slider has no effect on the sound until this

point is reached. Once you move the Knob or Slider past

this point, the red point disappears and moving the Knob

or Control Slider affects the sound.

4Turn Knob 1, Knob 3, and Knob 5 with the

TONE 2 lamp turned on.

You can change the sound by boosting or attenuating

the LOW, MID and HIGH band (as printed above the

Knobs respectively) of the EQ (equalizer).

5Press the [SELECTED PART CONTROL] button

a few times so that the ARP FX lamp lights,

turn [ARPEGGIO ON/OFF] on, then turn the

Knobs with your left hand while playing the

notes with your right hand.

In this status, all the Knobs can be used to change how

the Arpeggio is played back.

6Rotate Knob 8 (at the far left) while playing

keyboard to change the tempo of the Arpeggio.

7Rotate Knob 4 to change the gate time of the

Arpeggio notes, for example, from staccato to

legato playback.

Try out other Knobs as well.

nFor more information about the functions assigned to the

Knobs in the Voice mode, see page 90.

By using the Knobs in this way, you can change the sound

of the Preset Voice to create your original Voice.

nControlling the knobs does not affect some voices.

TONE 2

ARP FX

REVERB

CHORUS

PAN

TONE 1

CONTROL

SELECTED PART

CONTROL

MULTI PART

EQ LOW EQ MID F

CUTOFF RESONANCE

SWING

QUANTIZE

VALUE

EQ MID EQ MID Q

AT TA CK DECAY

QUANTIZE

STRENGTH GATE TIME

EQ HIGH PAN

SUSTAIN RELEASE

VELOCITY OCT RANGE

ASSIGN 1 ASSIGN 2

REVERB CHORUS

UNITMULTIPLY

TEMPO

[SELECTED PART

CONTROL] button

Knob 1 Knob 2 Knob 3 Knob 4 Knob 5 Knob 6 Knob 7 Knob 8

Functions assigned to Knobs

Storing the Voice

The MOTIF XS has space for three Banks of your own

User Voices. Store the Voice by pressing the [STORE]

button. For details, see page 97.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info