Bedienungsanleitung Yamaha MOTIF XS7 (Seite 45 von 320) (Englisch)

586887

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Connecting to a Computer

MOTIF XS Owner’s Manual 45

Connecting to

a Computer

You can integrate the MOTIF XS with DAW software on a

computer by connecting the mLAN equipped MOTIF XS

(MOTIF XS6/7 to which the optional mLAN16E2 is installed

or MOTIF XS8) to a computer in a peer-to-peer

arrangement. For details, see below.

•Transfer data of multiple audio channels between the

MOTIF XS and the computer (up to 16 channels from the

MOTIF XS to the computer and up to 6 channels from the

computer to the MOTIF XS)

•Simultaneously record to the sequence software (a) your

performance on the MOTIF XS and (b) the performance

of the computer sequence software that uses the MOTIF

XS as a MIDI tone generator

• Monitor via the MOTIF XS the audio output from the

computer and the audio output from the MOTIF XS

• Use Cubase 4 together with the MOTIF XS with a variety

of convenient functions (page 49)

nThe capabilities and uses of connecting the MOTIF XS to a

computer via an IEEE1394 cable in a peer-to-peer

arrangement is referred to as “mLAN” in this Owner’s Manual

and the MOTIF XS instrument. For details and the latest

information on mLAN, refer to the following URL:

http://www.yamahasynth.com/

The illustration below shows the ﬂow of audio signals and

MIDI messages when connecting the MOTIF XS and a

computer via an IEEE1394 cable.

MIDI transmission/reception (*1)

Setting the port on the MOTIF XS is not necessary since the

MIDI Port of the MOTIF XS is automatically ﬁxed according

to the application. For information on which port should be

selected on your computer, refer to page 43.

Audio signal transmission

■ mLAN OUT 1 – 14 (*2)

Audio signals are output via mLAN OUT 1 – 14 when the

MOTIF XS Output Select parameter is set to any of the settings

“m1&2” – “m13&14” and “m1” – “m14” in one of the following

displays.

[VOICE] (When a Drum Voice is selected) → [EDIT] → Key

selection → [F1] Oscillator (page 130)

[VOICE] → [UTILITY] → [F4] VoiceAudio → [SF1] Output

(page 266)

[PERFORM] → [EDIT] → [COMMON EDIT] → [F4] Audio In →

[SF1] Output (page 148)

[PERFORM] → [EDIT] → Part selection → [F1] Voice → [SF2]

Output (page 153)

[SONG]/[PATTERN] → [MIXING] → [EDIT] → [COMMON

EDIT] → [F4] Audio In → [SF1] Output (page 234)

[SONG]/[PATTERN] → [MIXING] → [EDIT] → Part selection →

[F1] Voice → [SF2] Output (page 235)

■ OUTPUT L/R (*3)

The audio signal is output via both the OUTPUT L/R and mLAN

OUT L/R channels when the Output Select parameter

described above is set to “L&R.”

What you can do with the IEEE1394

connection

Signal ﬂow of audio and MIDI data via

an IEEE1394 cable

mLAN IN L/R, etc.

mLAN OUT L/R

mLAN OUT 1-14ch

mLAN OUT 1-3 Ports

mLAN IN 1-3 Ports

AUDIO

MIDI

MOTIF XS

mLAN IN

(*4)

mLAN OUT

1-14

(*2)

mLAN OUT

L/R

(*3)

MIDI

(*1)

IEEE1394-compatible computer

IEEE1394 cable

mLAN connectors of the

MOTIF XS8 or the mLAN16E2

installed to the MOTIF XS6/7

Powered speakers

(such as the

HS80M)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info