Bedienungsanleitung Yamaha MOTIF XS7 (Seite 78 von 320) (Englisch)

586887

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Basic Structure

MOTIF XS Owner’s Manual

Basic Structure Basic Operation Connections

Basic Section

Used primarily as offset values for vibrato, ﬁlter, EG and other

settings. Data Entry is used to set the parameter value after

specifying the parameter using the NRPN MSB and LSB.

Once an NRPN is speciﬁed, the following data entry message

received on the same channel is processed as the value of

that NRPN. Prevent operational errors by transmitting an RPN

Null message (7FH, 7FH) after using these messages to

perform a control operation. Refer to “NRPN” for information

about the parameter (page 79).

nThis MIDI event cannot be handled by the tone generator

block, although it can be recorded to a Song/Pattern track.

RPN MSB (Registered Parameter Number MSB)

(Control Number 101)

RPN LSB (Registered Parameter Number LSB)

(Control Number 100)

Used primarily as offset values for pitch bend sensitivity,

tuning, and other part settings. Data Entry (page 77) is used to

set the parameter value after specifying the parameter using

the RPN MSB and RPN LSB. Once an RPN is speciﬁed, the

following data entry message received on the same channel is

processed as the value of that RPN. Prevent operational errors

by transmitting an Null message (7FH, 7FH) after using these

messages to perform a control operation. Refer to “RPN” for

information about the parameter.

All Sound Off (Control Number 120)

Tur ns all currently sounding notes off for all Parts.

Reset All Controllers (Control Number 121)

Resets all controllers to their initial values. The following

parameters are affected: Pitch Bend, Channel Pressure,

Polyphonic Key Pressure, Modulation, Expression, Hold 1,

Portamento, Sostenuto, Soft Pedal, Portamento Control, RPN*,

NRPN* (*The RPN and NRPN are speciﬁed as having no

number, and no internal data is changed). The following data

is not affected: Program Change, Bank Select MSB and LSB,

Volume, Pan, Dry Send Level, Effect Send Level 1, 3, and 4,

Pitch Sensitivity, Fine Tuning, Coarse Tuning.

Omni Mode Off (Control Number 124)

Performs the same operation as when an All Notes Off

message is received. The receive channel is set to 1.

Omni Mode On (Control Number 125)

Performs the same operation as when an All Notes Off message

is received. Only the receive channel is set to Omni On.

Mono (Control Number 126)

Performs the same operation as when an All Sound Off

message is received. If the 3rd byte parameter (the parameter

that determines the mono number) is 0 – 16, the Parts

corresponding to those channels are set to mono.

Poly (Control Number 127)

Performs the same operation as when an All Sound Off

message is received, and the Parts corresponding to those

channels are set to poly.

Channel Aftertouch (CAT)

This event is generated when pressure is applied to a key after

the note is played.

The data (000 – 127) represents the amount of pressure

applied to the key. The bar graph to the right is a graphic

representation of the value.

Polyphonic Aftertouch (PAT)

This event is generated when pressure is applied to a key after

the note is played. Unlike the Channel Aftertouch event,

however, individual data is provided for each key. Note Name

(C -2 – G8) speciﬁes the key. The data (000 – 127) represents

the amount of pressure applied to the key. The bar graph to

the right is a graphic representation of the value.

nThe Polyphonic Aftertouch cannot be handled by the tone

generator block although this event can be recorded to a

Song/Pattern track.

Registered Parameter Number (RPN)

Changes parameter values for each tone generator part.

Normally three types of control change data are sent: RPN

MSB (101), RPN LSB (100), and Data Entry MSB (6). In the

MOTIF XS, Data Entry LSB (38) is added to this and the

resulting group of control change events is handled as one.

Once an RPN is speciﬁed, the following data entry message

received on the same channel is processed as the value of

that RPN. Prevent operational errors by transmitting a Null

message (7FH, 7FH) after using these messages to perform a

control operation. The MOTIF XS tone generator block allows

control of the 4 following parameters:

RPN Parameter List

Data value Bar graph of

the data value

Data value Bar graph of

the data value

Note name

RPN number

MSB-LSB

Data entry

MSB-LSB

RPN Number Parameter Name Data Entry (Range) Initial

Value Function

MSB LSB MSB LSB

000 000 Pitch Bend Sensitivity 000 – 024 — 024 Speciﬁes the amount of pitch bend produced in response to pitch

bend data in semitone increments.

000 001 Fine Tune -64 – +63 — +00 Adjusts the tuning in cent increments.

000 002 Coarse Tune -24 – +24 — +00 Adjusts the tuning in semitone increments.

127 127 Null — — — Voids the RPN and NRPN settings so no tone generator settings are

changed when subsequent Data Entry messages are received.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info