Bedienungsanleitung Yamaha MOTIF XS7 (Seite 125 von 320) (Englisch)

586887

125

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Editing a Normal Voice

MOTIF XS Owner’s Manual 125

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

5 – 8 Offset 1 – 4

Determines the offset value to the level at each Break Point.

Settings: -128 – +0 – +127

Setting example of Amplitude Scaling

The best way to understand Amplitude Scaling is by example.

For the settings shown in the example display below, the basic

Amplitude (volume) value for the selected Element is 80, and

the various Offset values at the selected Break point settings

change that basic value accordingly. The speciﬁc changes to

the Amplitude are shown in the diagram below. The Amplitude

changes in a linear fashion between successive Break Points

as shown.

Modulating the Voice—[F5] Elm

LFO (Element LFO)

This display gives you a comprehensive set of controls

over the LFO for each individual Element. The LFO can be

used to create vibrato, wah, tremolo and other special

effects, by applying it to the pitch, ﬁlter and amplitude

parameters.

1Wave

Selects the Wave and determines how the LFO waveform

modulates the sound.

Settings: saw, triangle, square

2Key On Reset

Determines whether or not the LFO is reset each time a

note is played.

Settings: off, on

off

The LFO cycles freely with no key synchronization. Pressing a key

starts the LFO wave at whatever phase the LFO happens to be at that

point.

The LFO resets with each note you play and starts a wave at the phase

speciﬁed by the Phase parameter (above).

3Delay

Determines the delay time between the moment you press

note on the keyboard and the moment the LFO comes into

effect. A higher value results in a longer delay time.

Settings: 0 – 127

4Fade In Time

Determines the amount of time for the LFO effect to fade in

after the Delay time has elapsed. A higher value results in a

slower fade-in. When set to “0,” the LFO effect will not fade

in and reach the maximum level immediately after the

Delay time has elapsed.

Settings: 0 – 127

5Speed

Determines the speed of the LFO Wave. The higher the

value, the faster the LFO speed.

Settings: 0 – 63

6P Mod (Pitch Modulation Depth)

Determines the amount (depth) by which the LFO wave

varies (modulates) the pitch of the sound. The higher the

setting, the greater the depth of control.

Settings: 0 – 127

7F Mod (Filter Modulation Depth)

Determines the amount (depth) by which the LFO wave

varies (modulates) the Filter Cutoff frequency. The higher

the setting, the greater the depth of control.

Settings: 0 – 127

8A Mod (Amplitude Modulation Depth)

Determines the amount (depth) by which the LFO wave

varies (modulates) the amplitude or volume of the sound.

The higher the setting, the greater the depth of control.

Settings: 0 – 127

1234

Break Point C1 C2 C3 C4

Offset -4 +10 +17 +4

Amplitude

Note

Break

Point 1

Break

Point 2

Break

Point 3

Break

Point 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 125

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info