Bedienungsanleitung Yamaha MOTIF XS7 (Seite 130 von 320) (Englisch)

586887

130

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Editing a Drum Voice

MOTIF XS Owner’s Manual

130

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

3Wave Bank (Waveform Bank)*

Determines the Waveform Bank assigned to the Drum Key,

Preset or User. User Waveforms can be created based on

the samples recorded in the Sampling mode.

Settings: PRE (preset waveform), USR (user waveform)

nFor details about Waveform, refer to the explanation of the

Sampling Mode on page 161.

4Wave Category (Waveform Category)*

5Wave Number (Waveform Number)*

Determines the Waveform assigned to the Drum Key by

selecting the Waveform Category and Number. For a

complete list of Waveforms in the Preset Bank, refer to the

Waveform List in the separate Data List booklet.

6Assign Mode*

When this is set to “single,” double playback of the same

note is prevented. This is useful when two or more

instances of the same note are received nearly

simultaneously, or without a corresponding note off

message. To allow playback of each instance of the same

note, set this to “multi.” In general, you should probably set

this to “multi”—especially for tambourine and cymbal

sounds that you would want to ring out to their full decay,

when playing them multiple times in succession. Please

keep in mind that the “multi” setting consumes the overall

polyphony and it may cause sounds to be cut off.

Settings: single, multi

single

When this is set to “single” and double playback of the same note are

transmitted to the internal tone generator, the ﬁrst note will be stopped

then the next note will be sounded.

multi

When this is set to “multi” and double playback of the same note are

transmitted to the internal tone generator, all the notes are sounded

simultaneously.

7Receive Note Off

Determines whether or not the selected Drum Key

responds to MIDI Note Off messages. This should be set to

on when the selected Drum Key has a sustained, non-

decaying sound (such as a snare roll), so that you can stop

the sound by releasing the note.

Settings: off, on

8Alternate Group*

Determines the Alternate Group to which the key is

assigned. In a real drum kit, some drum sounds cannot

physically be played simultaneously, such as open and

closed hi-hats. You can prevent keys from playing back

simultaneously by assigning them to the same Alternate

Group. Up to 127 Alternate Groups can be deﬁned. You

can also select “off” here if you wish to allow the

simultaneous playback of sounds.

Settings: off, 1 – 127

9Ins Effect Output (Insertion Effect Output)

Determines which Insertion Effect (A or B) is used to

process each individual Drum Key. This parameter is same

as the Ins Effect Output in the Connect display (page 107)

in Voice Common Edit. Making a setting here automatically

changes the setting of that parameter as well.

When INSERTION CONNECT (2) is set to “ins L” in the

Connect display, Insertion L is used to process each

individual Drum Key, even if “ins A” or “ins B” is selected.

Settings: thru (through), ins A (Insertion Effect A), ins B (Insertion

Effect B)

)Reverb Send*

Determines the level of the Drum Key sound (the bypassed

signal) that is sent to Reverb effect. This is available only

when Insertion Effect Output (above) is set to “thru.” The

setting made here will be applied to the same parameters

in the Connect display (page 107) of the Voice Common

Edit.

Settings: 0 – 127

!Chorus Send*

Determines the level of the Drum Key sound (the bypassed

signal) that is sent to Chorus effect. This is available only

when Insertion Effect Output (above) is set to “thru.” The

setting made here will be applied to the same parameters

in the Connect display (page 107) of the Voice Common

Edit.

Settings: 0 – 127

@Output Select

Determines the speciﬁc output(s) for the individual Drum

key signal. You can assign each individual Drum Key

sound to be output from a speciﬁc hardware output jack on

the rear panel. This parameter is useful when you wish to

apply a connected external effect to a speciﬁc drum

instrument. The setting here is available only when the

Insertion Effect Output parameter (9) is set to “thru.”

Settings: See the table below.

nThe mLAN settings (m1 – m14) are available only for the

MOTIF XS8. The mLAN settings are available for MOTIF XS6/7

only when an optional mLAN16E2 has been installed.

LCD Output jacks Stereo/Mono

L&R OUTPUT L and R Stereo

asL&R ASSIGNABLE OUTPUT L and R Stereo

m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R)

m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R)

m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R)

m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R)

m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R)

m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R)

m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R)

asL ASSIGNABLE OUTPUT L Mono

asR ASSIGNABLE OUTPUT R Mono

m1 mLAN OUTPUT 1 Mono

:: :

m14 mLAN OUTPUT 14 Mono

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info