Bedienungsanleitung Yamaha MOTIF XS7 (Seite 141 von 320) (Englisch)

586887

141

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

MOTIF XS Owner’s Manual 141

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

7Key On Start Switch

When set to on, recording starts immediately when you

press any note on the keyboard.

Settings: on, off

8Copy Performance Parameters

Determines whether or not the Performance parameter

settings are copied to the Mixing of the destination Song or

Pattern.

Settings: on, off

9Measure (Indication only)

Indicates the current location of the recording via Measure

and Beat.

)Track Status (Indication only)

Indicates whether each track of the selected Song or

Pattern section contains sequence data or not.

![SF1] ARP1 – [SF5] ARP5 (Arpeggio 1 – 5)

The Arpeggio types are assigned to the Sub Function

buttons with the 8th note icon on the display tab. You can

call them up by pressing these buttons any time while

recording. The Arpeggio Type can be set in the Arpeggio

display (page 139).

Editing a Performance

The Performance Edit mode lets you create your own original Performances—containing up to four different Parts (Voices)—

by editing the various parameters. To enter the Performance Edit mode, press the [PERFORM] button to enter the

Performance mode, then press the [EDIT] button.

Common Edit and Part Edit

Each performance can contain a maximum of four Parts,

There are two types of Performance Edit displays: those for

Common Edit to edit the settings common to all four Parts,

and those for editing individual Parts.

Performance Edit Procedure

1Press the [PERFORM] button to enter the

Performance Play mode, then select a

Performance to be edited.

2Press the [EDIT] button to enter the

Performance Edit mode.

3Call up the desired Edit display, Common Edit

or Part Edit.

To call up the Common Edit display, press the

[COMMON EDIT] button. To call up the Part Edit

display, press any of the Number buttons [1] – [4]. In

the Part Edit mode, you can select the desired Part by

using the Number buttons [1] – [4].

4Call up the desired display.

To ﬁnd the desired display, note the tab menu items

corresponding to the [F1] – [F6] buttons and [SF1] –

[SF5] buttons. Each tab menu of the [F1] – [F6] buttons

contains sub menus which correspond to the [SF1] –

[SF5] buttons at the bottom of the display.

5Move the cursor to the desired parameter.

Common Edit

Lets you edit the

parameters common to

all Parts of the selected

Performance.

Performance Edit

Part Edit 1 – 4

Lets you edit the

parameters of the

individual Parts that

make up a Performance.

PA RT SELECT ARP ON/OFF

123456 87COMMON EDIT

Indicates this display is in the Common Edit mode.

Indicates this display is in the Part Edit mode.

Select a Part.

Tab menus corresponding to

the [F1] – [F6] buttons

Tab menus corresponding to

the [SF1] – [SF6] buttons

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 141

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info