Bedienungsanleitung Yamaha MOTIF XS7 (Seite 152 von 320) (Englisch)

586887

152

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Editing a Performance

MOTIF XS Owner’s Manual

152

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

copied when a Drum Voice is selected. However, these

parameters are copied when a Normal Voice is selected.

Settings: off (not copied), on (copied)

5Volume*

Determines the volume for each Part. Use this parameter to

adjust the balance between the current Part and other

Parts.

Settings: 0 – 127

6Pan*

Determines the stereo pan position for the Part.

Settings: L63 (far left) – C (center) – R63 (far right)

nNote that this Part Pan parameter may have little or no audible

effect if the Pan for a speciﬁc Element is set to the left position

and the Pan for another Element is set to the right position.

7Voice Element Pan

Determines whether the individual pan settings for each

Voice (made in the Voice Element Edit mode) are applied

or not. When this is set to “off,” the basic pan position for

the selected Part is set to center.

Settings: on, off

8Note Shift*

Adjusts the pitch of the Part in semitones.

Settings: -24 – +0 – +24

9Detune

Adjusts the tuning of the Part in cent increments.

Settings: -12.8 Hz – +0 Hz – +12.7 Hz

)Mono/Poly*

Determines the playback method of the Voice for each

Part—monophonic (single note only) or polyphonic

(multiple notes).

Settings: mono, poly

mono

When set to “mono,” the selected Performance is played back

monophonically (only a single note is played back simultaneously). For

many instrument sounds (such as bass and synth lead), this allows a

more natural and smooth sounding legato performance than when this

parameter is set to “poly.”

poly

When set to “poly,” the selected Performance is played back

polyphonically (multiple notes can be played back simultaneously or a

chord is played back).

!Portamento Part Sw*

Determines whether Portamento is applied to the current

Performance or not.

Settings: off, on

@Portamento Time*

Determines the pitch transition time. Higher values mean

longer transition times.

Settings: 0 – 127

#Portamento Mode

Determines how Portamento is applied to your keyboard

performance.

Settings: ﬁngered, fulltime

ﬁngered

Portamento is only applied when you play legato (playing the next note

before releasing the previous one).

fulltime

Portamento is applied to all notes.

$Velocity Limit

Determines the minimum and maximum values of the

velocity range within which each Part will respond. Each

Part will only sound for notes played within its speciﬁed

velocity range. If you specify the maximum value ﬁrst and

the minimum value second, for example “93 to 34,” there

will be a velocity “hole” and the velocity range covered will

be “1 to 34” and “93 to 127.”

Settings: 1 – 127

nYou can also set the velocity from the keyboard by holding

down the [SF6] KBD button and pressing any key with the

desired velocity (strength). For details, see page 82.

%Note Limit

Set the lowest and highest notes of the keyboard range for

each Part. Each Part will only sound for notes played within

its speciﬁed range. You can also create a lower and an

upper range for the Element, with a note range “hole” in the

middle, by specifying the highest note ﬁrst. For example,

setting a Note Limit of “C5 – C4” lets you play the Element

from two separate ranges: C -2 to C4 and C5 to G8. Notes

played between C4 and C5 do not play the selected

Element.

Settings: C -2 – G8

nYou can also set the Key directly from the keyboard, by

holding down the [SF6] KBD button and pressing the desired

key. For details, see page 82.

From this display, you can set the Reverb/Chorus depth

and the Output jack assignment for each Part.

1Reverb Send

Determines the Send level of each Part signal sent to the

Reverb effect. The higher the value, the deeper the Reverb.

Settings: 0 – 127

2Chorus Send

Determines the Send level of each Part signal sent to the

Chorus effect. The higher the value, the deeper the Chorus.

Settings: 0 – 127

Output settings—[SF2] Output

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 152

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info