Bedienungsanleitung Yamaha MOTIF XS7 (Seite 165 von 320) (Englisch)

586887

165

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Creating a Voice/Performance by Using the Sampling Function

MOTIF XS Owner’s Manual 165

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

5Frequency

Speciﬁes the sampling frequency. When the Input Source

(2) is set to “mLAN,” this parameter is ﬁxed to “44.1kHz.”

Normally, this parameter should be set to “44.1kHz,” the

highest setting. If you wish to obtain a lo-ﬁ sound, select a

value other than 44.1 kHz. At settings other than 44.1 kHz,

the sound monitored during recording may be different

from the recorded sound, depending on the source signal.

Settings: 44.1k (44.1 kHz), 22.0kLo (22.05 kHz Lo-Fi), 11.0kLo

(11.025 kHz Lo-Fi), 5.5kLo (5.5125 kHz Lo-Fi)

6Waveform

Determines the Waveform number as destination.

Settings: 0001 – 1024

The Sampling operation overwrites any data previously existing at

the destination Waveform number. Important data should always

be saved to a USB storage device connected to the USB TO

DEVICE terminal or to a computer connected to the same network

as the MOTIF XS (page 278).

7Keybank

Determines the note number of the Key Bank as

destination. The value set here can be changed in the

Sampling Edit mode (page 167).

Settings: C -2 – G8

nYou can also set the Key directly from the keyboard, by

holding down the [SF6] KBD button and pressing the desired

key. For details, see page 82.

8Track

This parameter is not available when entering the Sampling

mode from the Voice/Performance mode.

9Part

Determines the Performance Part to which the Voice ())

created by Sampling is assigned. When set to off, the

obtained Sample is not assigned to the Performance part.

This parameter is available when entering the Sampling

mode from the Performance mode. When the Voice ()) is

set to off, this parameter cannot be set even if entering the

Sampling mode from the Performance mode.

Settings: off, 1 – 4

)Voice

Determines the voice to which the Waveform (6) created

via the Sampling is assigned by specifying the Voice Bank

and Number. Setting the Voice Bank to any of USER1 – 3

assigns the Waveform (6) to the Element 1 of the new

Normal Voice created via Sampling. Setting the Voice Bank

to UDR assigns the Waveform (6) to the Drum Key (!) of

the speciﬁed Drum Voice. When this is set to “off,” only a

Waveform (6) is created; the Sample is not stored as a

User Voice.

Settings:

Voice Bank: Off, USER1 – 3 (User 1 – 3), UDR (User Drum)

Voice Number: 001 – 128

When the Voice Bank is set to any of USER1 – 3, the Sampling

operation overwrites any data already existing in the destination

Voice number. Important data should always be saved to a USB

storage device connected to the USB TO DEVICE terminal or to a

computer connected to the same network as the MOTIF XS

(page 278).

!Drum Key

Determines the Key to which the Waveform (6) is

assigned when the Voice Bank ()) is set to “UDR.”

Settings: C0 – C6

@Recordable Time (Indication only)

Indicates the available Sampling time using the available

memory. The time indicated here is calculated assuming a

mono signal with a sampling frequency of 44.1 kHz. The

amount of memory space currently being used is shown in

the display as a blue line.

#[SF6] INFO (Information)

Indicates the amount of Sampling memory used.

1Used/Total (Indication only)

Indicates the amount of memory being used and the total

amount available.

2Recordable Size (Indication only)

Indicates the amount of free memory.

3Recordable Time (Indication only)

Indicates the available Sampling time using the available

memory. The time indicated here is calculated assuming

that the sampling frequency is 44.1 kHz with mono.

$[F6] Standby

Pressing this button calls up the Sampling Record Standby

display. This display is used for executing Sampling. For

details, see page 166.

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 165

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info