Bedienungsanleitung Yamaha MOTIF XS7 (Seite 211 von 320) (Englisch)

586887

211

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

Pattern Playback

MOTIF XS Owner’s Manual 211

%[SF1] Scene1 – [SF5] Scene5

You can assign the settings of the Pattern-related

parameters (Pattern Scene) and Arpeggio-related

parameters to these buttons. You can also recall these

settings by pressing these buttons. For detailed

instructions on registering Scenes, see page 179. For

detailed instructions on setting the Arpeggio-related

parameters, see page 189.

nThe Arpeggio is not available during Pattern playback.

Pressing the [SF1] Scene 1 – [SF5] Scene 5 buttons during

playback changes only the Pattern Scene.

nAfter registering the Pattern Scene, the 8th note icon will

appear on the tab corresponding to the pressed button. You

can conﬁrm whether or not the Arpeggio Type is assigned to

that button in the Arpeggio display (page 189) of the Pattern

Record.

^[SF6] INFO (Information)

You can view the amount of free and used sequencer

memory. The sequencer memory covers the all Songs and

Patterns recorded in the respective modes. When the used

memory amount reaches the maximum capacity, no further

Songs or Patterns can be stored. If this occurs, use the

Song Job or Pattern Job to delete any unnecessary Songs

or Patterns. You can go back to the previous display by

pressing the [SF6] button or the [EXIT] button.

&[F1] Play

Calls up the Play display.

*[F2] Play FX (Play Effect)

Calls up the Play Effect display.

([F3] Track

Calls up the Track display.

º[F4] Patch

Calls up the Patch display (page 212).

¡[F5] Chain (Pattern Chain)

Calls up the Pattern Chain display (page 213).

™[F6] Remix

Calls up the Remix display (page 217). This menu is shown

only when the cursor is located on the track containing

data.

Changing the rhythmic “feel” of the

Pattern—[F2] Play FX (Play Effect)

By changing the timing and velocity of the notes, you can

change the rhythmic “feel” of Pattern playback. The Play

Effect settings made here are only temporary and don’t

change the actual data in the Pattern. The Play Effect

settings can be applied actually to the Pattern data by

using the Normalize Play Effect Job.

The operation is same as in the Song Play mode. See

page 183.

Track Settings—[F3] Track

This display lets you set the MIDI Transmit Channel for

each track.

Regarding parameters with no number, refer to the Play

display (page 210).

1Pattern name (Indication only)

Indicates the name of the current Pattern.

2Voice (Voice name) (Indication only)

3TxCh (Transmit Channel)

4Int (Internal Switch)

5Ext (External Switch)

These are the same as in the Song Play mode. See

page 184.

23 4 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 211

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info