Bedienungsanleitung Yamaha MOTIF XS7 (Seite 216 von 320) (Englisch)

586887

216

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Pattern Playback

MOTIF XS Owner’s Manual

216

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

This Job operation overwrites any data previously existing in the

destination Song and the Undo/Redo (page 223) Job cannot be

used after executing this Job. Important data should always be

saved to a USB storage device connected to the USB TO DEVICE

terminal or to a computer connected to the same network as the

MOTIF XS (page 278).

[SF4] Insert

From this display, you can insert a new event to the Pattern

Chain. After setting the following parameters, press the

[F6] Set button or [ENTER] button to actually insert the

event.

1Event Type

Determines the event type to be inserted.

Settings: Time Signature, Section, end, Tempo Change, Track Mute

end

Indicates the end position of the Pattern Chain.

2Inserting location

Speciﬁes the location at which the new event will be

inserted.

Settings:

MEAS (Measure): 001 – 999

BEAT: 01 – 16 (depends on the meter)

CLOCK: 000 – 479 (depends on the meter)

3Value of the selected event type

Enters the value of the event to be inserted. The values

available differ depending on the selected Event Type (1).

Settings:

Time Signature: 1/16 – 16/16, 1/8 – 16/8, 1/4 – 8/4

Section: A – P, end (end of the data)

Tempo Change: 005.0 – 300.0

Track Mute: m (mute on), blank (mute off)

[SF5] Delete

Deletes the currently selected event. This button is not

available when the cursor is located at the Time Signature

event, Tempo Change or top/bottom of the data.

1Select a Pattern on the Chain Play display.

This step is necessary because each Pattern has its

own dedicated Pattern Chain data.

2Press the [EDIT] button to call up the Chain

Edit display.

3Edit the already-recorded events.

Move the cursor to each of parameters, then set the

value by using the data dial, [INC/YES] and [DEC/NO]

buttons. To make it easier to ﬁnd desired parameters,

use the View Filter display called up via the [SF1]

button. You can use the Copy function called up via the

[SF2] button to copy the events from a speciﬁed range

to another range.

If you wish to delete the event, move the cursor to the

event to be deleted then press the [SF5] button.

If you wish to insert a new event, press the [SF4] button

to call up the Insert display. From this display, you can

input the events one by one.

4Convert the created Pattern Chain data to a

Song.

By using the Convert To Song display called up via the

[SF3] button, you can convert the created Pattern

Chain data to MIDI sequence data and copy the

converted data to a speciﬁed Song. This function is

useful for quickly creating backing and accompaniment

parts for Song data.

5Store the created Pattern Chain data to internal

User Memory.

From the Store window called up via the [STORE]

button, you can store the current Pattern including the

created Pattern Chain data to internal memory. After

storing the Pattern data, the Pattern Chain included in

the Pattern is maintained even if the power is turned off.

1From the Chain Edit display, press the [SF4]

Insert button to call up the Insert window.

2Specify the event type to be inserted, the

insertion point (measure, beat, and clock), and

parameter value of the event.

3Press the [F6] Set button to insert the speciﬁed

event at the speciﬁed location.

You can continue inserting new events since the Insert

Event window remains open. Press the [ENTER] button

to actually insert the event and close the Insert window.

4Press the [EXIT] button to go back to the Chain

Play display.

Pattern Chain Edit Procedure

CAUTION

Entering New Events

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 216

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info