Bedienungsanleitung Yamaha MOTIF XS7 (Seite 219 von 320) (Englisch)

586887

219

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Pattern Recording

MOTIF XS Owner’s Manual 219

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

Preparing the Pattern Recording—

[F1] Setup

1Pattern name (Indication only)

Indicates the name of the current Pattern. The Pattern can

be selected in the Pattern Play display (page 210).

2Measure

Determines the measure from which recording starts. This

also indicates the current location of recording.

Settings:

Measure: 001 – 256

Beat: Indication only

3Length

Determines the Pattern Length. This also represents the

length of the Phrase created via Recording procedure.

Settings: 001 – 256

4Section (Indication only)

Indicates the Section to be recorded. The Section can be

set from the Pattern Play display (page 210).

5Time signature (Meter)

Speciﬁes the meter (time signature) for the Pattern.

Settings: 1/16 – 16/16, 1/8 – 16/8, 1/4 – 8/4

6Tempo

This is the same as in the Song Record mode. See

page 187.

7Keyboard Start

When Keyboard Start is set to on, Pattern recording begins

as soon as you press a key on of the keyboard.

Settings: (on), (off)

8Track number (Indication only)

9Track type (Indication only)

)Mute/Solo (Indication only)

!Voice Name (Indication only)

These are the same as in the Song Record mode. See

page 187.

@REC TR (Record Track)

Determines the track to be recorded. Move the cursor to

the desired track or press any of the Number buttons [1] –

[16] with the TRACK lamp turned on so that the red circle is

shown in the corresponding column of the REC TR.

Settings: 1 – 16

#Record Type

Determines the Recording method.

Settings: replace, overdub

replace

You can use this method when you want to overwrite an already

recorded track with new data in real time. The original data will be

erased.

overdub

You can use this method when you want to add more data to a track that

already contains data. Previously recorded data will be maintained.

$Loop (Loop Recording)

Determines whether the Recording is looped or not when

executing Realtime recording. When set to on, the phrase

will play repeatedly during real-time recording. This can be

handy when recording drum Parts with the Recording type

set to “overdub,” allowing you to add different instruments

on each pass. When set to off, recording stops after one

pass through the phrase.

%Record Part

^Quantize (Record Quantize)

&Voice

*Volume

(Pan

ºIns Effect Sw (Insertion Effect Switch)

These are the same as in the Song Record mode. See

page 188.

¡[SF1] Scene1 – [SF5] Scene5

You can change the settings of the Pattern-related

parameters (Pattern Scene) and Arpeggio-related

parameters by pressing these buttons. For details, refer to

the description of the same buttons in the Pattern Play

mode on page 211.

™[F1] Setup

Pressing this button returns from the previous display to the

Record Setup display.

£[F2] Arpeggio (Record Arpeggio)

The operation is same as the one in the Record Arpeggio

display (page 189) in the Song mode.

4! @5 12

(

™£ ¢ ∞

Measure LengthBeat

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 219

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info