Bedienungsanleitung Yamaha MOTIF XS7 (Seite 228 von 320) (Englisch)

586887

228

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Pattern Jobs

MOTIF XS Owner’s Manual

228

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

This Job splits a selected Pattern (1) into two separate

Patterns (1 and 2). The Pattern 1 is divided at the Split

Point (3). Actually, the Phrases making up the source

Pattern (1) will be divided and the divided Phrases after

the Split Point will be assigned to the tracks of the

destination Pattern.

1Original Pattern

Determines the original Pattern to be split by selecting the

Pattern number (01 – 64) and Section (A – P). Executing

the Job leaves the part before the Split Point in the original

Phrase.

2Destination Pattern

Determines the split destination Pattern by selecting the

Pattern number (01 – 64) and Section (off, A – P).

Executing the Job moves the part after the Split Point to

this split destination Pattern. When either of the Pattern

number or Section is set to “off,” the part after the Split

Point (3) of the original pattern (1) will be deleted.

This Job overwrites any data already existing in the split

destination Pattern (2).

3Splitpoint Measure

Speciﬁes the measure at which the Pattern will be split.

Settings: 002 – 256

4Keep Original Phrase

When this box is checkmarked, the Phrase of the original

Pattern is retained in memory and the results of the Split

Job are written to empty Phrases. When the Keep Original

Phrase checkbox is checked, this Job requires twice the

number of empty user Phrases as the number of tracks

containing data in which to store the appended Phrase

data. If the required space is not available, an alert

message will appear and the Job will be aborted. If this

occurs, use the Clear Phrase Job to delete unused

Phrases and try again.

When this box is not checkmarked, the Phrases making up

the original Pattern are erased and replaced with the newly

created Phrases.

5Copy Sample Voice

When this box is checkmarked, Sample Voices (if included

in the original Pattern) are copied to the destination

Pattern.

This Job clears speciﬁed Pattern. You can also clear only

the speciﬁed Section of the selected Pattern.

1Pattern (Pattern and Section) to be cleared

Determines the Pattern to be cleared. When the Pattern is

set to “all,” all the Pattern data will be cleared. When the

Section is set to “all,” all data from the selected Pattern will

be cleared.

2Clear Pattern Chain

When the checkbox is checked, the Pattern Chain data will

also be cleared. When the checkbox is not checked, the

Pattern Chain data will not be cleared.

nThe Waveform on DIMM cannot be deleted via this Job even if

the Sample Voice is used in the speciﬁed Section. If you want

to actually delete the Waveform assigned to the Sample Voice

used in the speciﬁed Section, use the Delete Job (page 177)

in the Sampling Job mode.

03: Split Pattern

135

CAUTION

04: Clear Pattern

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 228

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info