Bedienungsanleitung Yamaha MOTIF XS7 (Seite 234 von 320) (Englisch)

586887

234

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Multi-timbral Tone Generator Settings for Song/Pattern Playback (Mixing mode)

MOTIF XS Owner’s Manual

234

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

[SF2] MasterFX (Master Effect)

This display lets you set the type and parameters of the

Master Effect.

The function is the same as the one in the Master Effect

display (page 146) in the Performance Common Edit mode.

[SF3] MasterEQ

From this display you can apply ﬁve-band equalization to

all Parts of the selected Mixing.

The function is the same as the one in the Master EQ

display (page 146) in the Performance Common Edit mode.

The controllers and knobs on the front panel can be used

to change and adjust a variety of parameters—in real time,

and simultaneously. For example, you could use the

ASSIGN 1 and 2 knobs to control effect depth, while using

the Foot Controller to control modulation. These control

assignments are called “Controller Assign.” You can set

different Control Set assignments for each Mixing.

The function is same as the one on the Controller Assign

display (page 147) in the Performance Common Edit

mode.

You can set parameters related to audio input from the A/D

INPUT connector and the mLAN connector.

The mLAN Input is available only for the MOTIF XS8. This is

available for MOTIF XS6/7 only when an optional

mLAN16E2 has been installed.

[SF1] Output

From this display you can set the Send level of the Audio

Input Part signal sent to the Reverb/Chorus effect and the

output jack assignment for the Audio Input Part.

The function of this display is the same as the one in the

Output display (page 147) in the Performance Common

Edit mode.

[SF2] Connect

Determines the effect routing for Insertion Effects A and B.

The setting changes are shown on the diagram in the display,

giving you a clear picture of how the signal is routed.

The function of this display is the same as the one in the

Insertion Effect Connection display (page 148) in the

Performance Common Edit mode.

[SF3] Ins A (Insertion Effect A)

[SF4] Ins B (Insertion Effect B)

From this display, you can also set the type and its

parameters of the Insertion Effect.

The function of this display is the same as the one in the

Insertion Effect A/Insertion Effect B display (page 149) in

the Performance Common Edit mode.

From the following displays, you can set the Effect

connection and values of other parameters. For details

about the Effect structure in the Mixing mode, see page 70.

[SF1] Connect

From this display, you can set the Return level of the

Reverb/Chorus effect, Effect Pan, and Chorus to Send

Level.

The function of this display is the same as the one in the

Connection display (page 149) in the Performance

Common Edit mode.

[SF2] Ins Switch (Insertion Effect Switch)

In this display, you can select which Parts (from Mixing

Parts 1 – 16 and the Audio Input Part) will be assigned to

the eight Insertion Effects.

1Part 1 – 16, A/D

Determines the Parts available for the Insertion Effect.

When this switch is set to on, the Insertion Effect of the

Voice assigned to the Part is enabled. Make sure that this

parameter is set to on for any Parts/Voices to which you

need to apply Insertion Effects.

The MOTIF XS features eight Insertion effect systems,

letting you set this parameter to on for up to eight Parts. If

eight Parts are already turned on, the parameter cannot be

turned on for additional Parts. In this case, the switch for

another Part must be turned off before you can turn the

switch for the desired Part on.

nFor the Audio Input Part, the Insertion Effect type/parameter

can be set on the Insertion A/B display (page 234) in the

Mixing Common Edit mode. For Parts 1 – 16, the Insertion

Effect type/parameter settings cannot be set in the Mixing Edit

mode because their settings are included in the Voice

assigned to each Part. If you wish to edit the Insertion Effect

settings for each Part, enter the Mixing Voice Edit mode, then

edit the Effect settings for the Voice.

Master Effect and Master EQ settings—

[F2] MasterFX (Master Effect)

Controller Settings—[F3] Ctrl Asgn

(Controller Assign)

Audio Input Part Settings—[F4] Audio In

Effect Settings—[F5] Effect

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 234

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info