Bedienungsanleitung Yamaha MOTIF XS7 (Seite 280 von 320) (Englisch)

586887

280

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

File Management (File mode)

MOTIF XS Owner’s Manual

280

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

3Select the source data.

nThe available source memory differs depending on the

mode selected before entering the File mode. When you

want to save a Song, enter the File mode from the Song

mode. When you want to save a Pattern, enter the File

mode from the Pattern mode.

4Press the [ENTER] button to call up the

window for entering the ﬁle name.

5Enter the ﬁle name, press the [ENTER] button

then the [INC/YES] button to save the data to

the external memory device.

The ﬁle name may contain up to 20 characters. For

detailed instructions on naming, refer to “Basic

Operation” on page 82.

Loading a ﬁle

The loading procedure differs depending on the ﬁle type to

be loaded and the mode selected before calling up the File

window. This section explains the procedure relevant to

following eight cases.

• Loading all user data or all data of a speciﬁc type (all

voices, all songs, all patterns, etc.)

• Loading a speciﬁc Voice from an “all” or “all voice” ﬁle

• Loading a speciﬁc Waveform from an “all” or “all

waveform” ﬁle

• Loading a speciﬁc Performance from an “all” ﬁle

• Loading a speciﬁc Song or Pattern from an “all” or “all

song” or “all pattern” ﬁle

• Loading a speciﬁc Sample Voice from an “all” or “all

song” or “all pattern” ﬁle

• Loading a WAV ﬁle or an AIFF ﬁle

• Loading a SMF ﬁle (Standard MIDI ﬁle)

1Select a device and directory including the

source ﬁle by following “Basic Procedure in

the File mode” on page 276.

nWhen you wish to load all 64 Songs, press the [SONG]

button to enter the Song mode then press the [FILE]

button to call up the File window. When you wish to load

all 64 Patterns, press the [PATTERN] button to enter the

Pattern mode then press the [FILE] button to call up the

File window.

2Set the Type to the desired one of “all,” “all

without system,” “all voice,” “all arpeggio,” “all

waveform,” “editor,” “all song,” and “all

pattern.”

Only available ﬁles according to the Type are listed in

the Directory/File list box on the display.

3Select the ﬁle to be loaded.

You can select any of the ﬁles listed in the Directory/File

list box on the display.

4Press the [SF2] button (a prompt for

conﬁrmation appears).

Press the [DEC/NO] button to cancel the Load

operation.

5Press the [INC/YES] button to execute the

Load operation.

The Load operation overwrites any data previously existing in

the destination internal memory. Important data should always

be saved to a USB storage device connected to the USB TO

DEVICE terminal or to a computer connected to the same

network as the MOTIF XS (page 278).

1Select a device and directory as source by

following “Basic Procedure in the File mode”

on page 276.

Loading all user data or all data of a

speciﬁc type

Loading a speciﬁc Voice from an “all”

or “all voice” ﬁle

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS7 Seite 280

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info