Bedienungsanleitung Yamaha MOTIF XS8 (Seite 255 von 320) (Englisch)

586888

255

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Using as a Master Keyboard (Master mode)

MOTIF XS Owner’s Manual 255

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

4Knob Ctrl Assign (Knob Control Assign)

From this display you can set which row of Knob functions

will be lit and selected. When set to “zone,” selecting the

Master lights no lamp and automatically calls up the Knob/

Slider functions speciﬁcally set for each respective Zone

(page 257).

Settings: Differs depending on the Mode setting above. Note that

“zone” can be selected only when the Zone Switch (3) is

set to “on.”

When the Mode is set to Voice:

tone 1, tone 2, ARP FX, zone

When the Mode is set to Performance, Pattern or Song:

tone 1, tone 2, ARP FX, reverb, chorus, pan, zone

5[F6] Get Name

Pressing the [F6] button assigns the name of the currently

selected Voice/Performance/Song/Pattern to the Master

name.

Zone Edit parameters

[MASTER] ➞ [EDIT] ➞ [1] – [8]

These parameters are for editing the individual Zones that

make up a Master. To call up the Zone Edit display, press

the [EDIT] button in the Master Play mode, then press any

of the Number buttons [1] – [8]. Press the [EXIT] button to

return to the Master Play display.

From this display you can set how each Zone transmits

MIDI messages when you play the keyboard.

1Transmit Channel

Determines the MIDI Transmit Channel for each Zone.

Settings: 1 – 16

2Int Switch (Internal Switch)

Determines whether or not MIDI data for each Zone is

transmitted to the internal tone generator.

nWhen the Local Control parameter is set to “off” on the MIDI

display (page 267) in the Utility mode, MIDI data for each

Zone will not be transmitted to the internal tone generator,

even if the Int Switch parameter is set to “on.”

3Ext Switch (External Switch)

Determines whether or not MIDI data for each Zone is

transmitted to an external MIDI device.

From this display you can set the pitch- and keyboard-

related parameters for each Zone—allowing you to set up

Zone splits and determine the pitch range for each Zone.

1Octave

Determines the amount in octaves by which the range of

the Zone is shifted up or down. You can adjust the offset up

or down over a maximum range of three octaves.

Settings: -3 – +0 (Default) – +3

2Transpose

Determines the amount in semitones by which the range of

the Zone is shifted up or down.

Settings: -11 – +0 (Default) – +11

3Note Limit Low

4Note Limit High

Determines the lowest and highest notes of the range for

each Zone.

Settings: C -2 – G8

nYou can also set the note directly from the Keyboard, by

holding down the [SF6] button and pressing the desired key.

MIDI Transmit Switch for the Voice related

messages—[SF1] Program

From this display, you can determine whether or not MIDI

messages controlling Voice selection for each Zone are

transmitted to the internal/external tone generator.

1Int Bank Select (Internal Bank Select)

Determines whether or not to transmit Bank Select MSB/

LSB messages to the internal tone generator.

MIDI Transmit Channel/Switch Settings

—[F1] Transmit

Note Range Setting for each Zone—

[F2] Note

MIDI Transmit Switch Settings—[F3] Tx

Switch (Transmit Switch)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS8 Seite 255

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info