Bedienungsanleitung Yamaha MOTIF XS8 (Seite 266 von 320) (Englisch)

586888

266

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

System Settings (Utility mode, etc.)

MOTIF XS Owner’s Manual

266

4Output Select

Determines the output jack assignment for the Audio Input

Part.

Settings: See the table below.

nYou can call up the list and select the desired item by pressing

the [SF6] LIST button. For details, see page 82.

5Reverb Send

Determines the Send level of the Audio Input Part signal

sent to the Reverb effect. The higher the value, the more

pronounced the Reverb.

Settings: 0 – 127

6Chorus Send

Determines the Send level of the Audio Input Part signal

sent to the Chorus effect. The higher the value, the more

pronounced the Chorus.

Settings: 0 – 127

7Dry Level

Determines the level of the Audio Input Part which has not

been processed with the System Effects (Reverb, Chorus).

The higher the value, the less pronounced the Reverb and

Chorus.

Settings: 0 – 127

nThe Reverb Send (5), Chorus Send (6), and Dry Level (7)

parameters are not available when Output Select (4) is set to

“insL.”

From this display you can set the Insertion Effect

connection of the Audio Input signal in the Voice mode.

This display is available only when entering the Utility

mode from the Voice mode.

1INSERTION CONNECT (Insertion Connection)

Determines the effect routing for Insertion effects A and B.

The setting changes are shown on the diagram in the

display, giving you a clear picture of how the signal is

routed.

Settings: Ins A F B, Ins B F A

Ins A F B

Signals processed with Insertion Effect A will be sent to Insertion Effect

B and signals processed with Insertion Effect B are sent to Reverb and

Chorus.

Ins B F A

Signals processed with Insertion Effect B will be sent to Insertion Effect

A and signals processed with Insertion Effect A are sent to Reverb and

Chorus.

2Insertion A (Insertion A Category/Type)*

3Insertion B (Insertion B Category/Type)*

Determines the Effect type for Insertion A and B. From the

Category column, you can select one of the Effect

Categories, each of which contains similar Effect types.

From the Type column, you can select one of the Effect

Types listed in the selected Category.

Settings: Details about the Effect categories and types are described

on page 70.

nYou can call up the list and select the desired item by pressing

the [SF6] LIST button. For details, see page 82.

LCD Output jacks Stereo/Mono

L&R OUTPUT L and R Stereo

asL&R ASSIGNABLE OUTPUT L and R Stereo

m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R)

m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R)

m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R)

m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R)

m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R)

m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R)

m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R)

asL ASSIGNABLE OUTPUT L Mono

asR ASSIGNABLE OUTPUT R Mono

m1 mLAN OUTPUT 1 Mono

:: :

m14 mLAN OUTPUT 14 Mono

ins L

(A/D Input

only)

Internal Vocoder module Mono

Insertion Effect Connection Settings—

[SF2] Connect

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS8 Seite 266

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info