Bedienungsanleitung Yamaha MOTIF XS8 (Seite 278 von 320) (Englisch)

586888

278

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

File Management (File mode)

MOTIF XS Owner’s Manual

278

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

Formatting a Device—[SF3] Format

From this display, you can format memory storage devices

such as a hard disk connected to the USB TO DEVICE

connector.

1Device

The connected and mounted devices are listed here,

letting you select the device to be formatted. A device that

requires formatting is indicated by “unknown device

(usb***).” The three asterisks (***) in the indication denote

the sequential serial numbers of the connected devices

which need to be formatted. When several partitions are

included in a single device, the partition number is

indicated at the right of the serial number.

2Volume Label

Determines the Volume Label of the selected device. The

Volume Label is the name assigned to the device. The

Volume Label can contain up to 11 characters. For detailed

instructions on naming, refer to “Basic Operation” on

page 82.

1Connect the device to be formatted to the USB

TO DEVICE terminal.

2Select a device to be formatted from the Device

list (1).

3Enter the Volume Label (2) as desired.

4Press the [ENTER] button. (The display

prompts you for conﬁrmation.)

Press the [DEC/NO] button to cancel the Format.

5Press the [INC/YES] button to execute the

Format operation.

If you format the device, all the previously recorded data will be

deleted. Make sure to check beforehand whether or not the

device contains important data. When checking the contents of

the device in the [F1] File window, keep in mind that some ﬁles

(which are not listed on pages 273 and 274) are not shown on

the display of the MOTIF XS, even if the File Type is set to “all.”

Saving a ﬁle

The saving procedure differs depending on the ﬁle type to

be saved and the mode selected before calling up the File

window. This section explains the procedure relevant to

following three cases.

• Saving all user data or all data of a speciﬁc type

• Saving the sample of a speciﬁc Voice

• Saving a Song or a Pattern Section as a Standard MIDI

File

1Select a device and directory as destination by

following “Basic Procedure in the File mode”

on page 276.

nWhen you wish to save all 64 songs, press the [SONG]

button to enter the Song mode then press the [FILE]

button to call up the File window. When you wish to save

all 64 patterns, press the [PATTERN] button to enter the

Pattern mode then press the [FILE] button to call up the

File window.

nFollow the instructions below after selecting a Voice,

Performance, Song or Pattern to which the Sample to be

saved is assigned in each of the modes.

2Set the Type to the desired one of “all,” “all

voice,” “all arpeggio,” “all waveform,” “editor,”

“all song,” and “all pattern.”

3Press the [SF1] Save button to call up the

window for entering the ﬁle name.

4Enter the ﬁle name, press the [ENTER] button

then the [INC/YES] button to save the data of

the speciﬁed type to the external memory

device.

The ﬁle name can contain up to 20 characters. For detailed

instructions on naming, refer to “Basic Operation” on

page 82.

Format Procedure

CAUTION

Saving all user data or all data of a

speciﬁc type

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS8 Seite 278

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info