Bedienungsanleitung Yamaha MOTIF XS8 (Seite 281 von 320) (Englisch)

586888

281

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

File Management (File mode)

MOTIF XS Owner’s Manual 281

2Set the Type to “voice.”

Only available ﬁles according to the Type are listed in

the Directory/File list box on the display.

nIn this step, the Load menu corresponding to the [SF2]

button is not shown in the display. The Load menu

appears when selecting a Voice to be loaded in step 6.

3Specify the destination memory location in the

User memory.

Select a Voice Bank and number as destination.

nWhen entering the File mode from the Performance/Song/

Pattern mode, set a Part to which the loaded Voice is to be

assigned as well as a Voice Bank and number.

nWhen loading a Drum Voice, select the User Drum Voice

Bank (UDR) as the destination memory location (5).

When loading a Normal Voice, select one of the User

Normal Voice Banks (USR1 – 3) as the destination

memory location (5). If the appropriate Voice Bank is not

set, pressing the [SF2] Load button calls up an error

message.

4Move the cursor to the ﬁle to be loaded.

You can select any of the ﬁles listed in the Directory/File

list box on the display.

5Press the [ENTER] button so that the Voices of

the speciﬁed Bank are listed in the Directory/

File list box.

When the Normal Voice Bank is selected in step 3, you

can change the Voice Bank as source by pressing one

of the Bank buttons (USR1 – 3) on the front panel.

6Move the cursor to the desired Voice.

The Load menu corresponding to the [SF2] button

appears.

7Press the [SF2] button (a prompt for

conﬁrmation appears).

Press the [DEC/NO] button to cancel the Load

operation.

8Press the [INC/YES] button to execute the

Load operation.

The Load operation overwrites any data previously existing in

the destination internal memory. Important data should always

be saved to a USB storage device connected to the USB TO

DEVICE terminal or to a computer connected to the same

network as the MOTIF XS (page 278).

1Select a device and directory as source by

following “Basic Procedure in the File mode”

on page 276.

2Set the Type to “waveform.”

Only available ﬁles according to the Type are listed in

the Directory/File list box on the display.

In this step, the Load menu corresponding to the [SF2]

button is not shown in the display. The Load menu appears

when selecting a Waveform to be loaded in step 6.

3Specify the destination memory location in the

User memory.

Select an Element (for a Normal Voice) to which the

Waveform (loaded to an empty number) is to be

assigned.

nWhen entering the File mode from the Performance/Song/

Pattern mode, set a Part to which the Voice including the

loaded Waveform is to be assigned.

nPlease note that Waveforms cannot be loaded to a Drum

Voice.

4Select the ﬁle to be loaded.

You can select any of the ﬁles listed in the Directory/File

list box on the display.

Voice List

Loading a speciﬁc Waveform from an

“all” or “all waveform” ﬁle

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS8 Seite 281

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info