Bedienungsanleitung Yamaha MOTIF XS8 (Seite 295 von 320) (Englisch)

586888

295

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

Installing Optional Hardware

MOTIF XS Owner’s Manual 295

Appendix

Optional DIMM Installation

This section explains how to install DIMM memory modules

to the MOTIF XS.

The MOTIF XS does not necessarily support all

commercially available DIMMs. Yamaha cannot guarantee

operation of DIMMs that you purchase. Before purchasing

DIMMs, please consult your Yamaha dealer, or an

authorized Yamaha distributor (see list at end of the

Owner’s Manual) for advice, or see the following website:

http://www.yamahasynth.com/

•Yamaha recommends that you purchase DIMMs that

conform to the JEDEC* standard. Please be aware,

however, that conformance to this standard does not

constitute a guarantee that the DIMMs will operate

correctly on the MOTIF XS.

*JEDEC (Joint Electron Device Engineering Council) sets

standards for terminal conﬁgurations within electronic devices.

• Use only 168-pin DIMMs of 64, 128, 256 or 512 MB

capacity (synchronized DRAM; PC100 or PC133).

• When installing DIMMs, make sure to install them in a

matched pair of the same capacity. You cannot install

only one module and leave the second memory socket

open. Also make sure each DIMM in the pair is of the

same manufacturer and the same type. DIMMs of

different makers and conﬁgurations may not work

together.

• When purchasing DIMMs, make sure that the DIMM

design does not utilize more than 18 memory chips per

module. (DIMMs comprised of more than 18 chips do not

operate correctly on the MOTIF XS.)

1Turn the power of the MOTIF XS off, and

disconnect the AC power cord. Also, make

sure to disconnect the MOTIF XS from any

connected external devices.

2Turn over the MOTIF XS so that the keyboard

faces down, giving you direct access to the

underside of the instrument.

To protect the Knobs, Wheels and Sliders from

damage, place the keyboard so the four corners are

supported by something that provides sufﬁcient

support like magazines or cushions. Place supports at

all four corners, taking care not to touch the Knobs,

Wheels and Sliders.

Since the instrument—particularly the MOTIF XS8—is very

heavy, this procedure should not be done alone, but by two or

three people.

3Remove the cover from the bottom.

With the rear panel of the MOTIF XS facing you, remove

the screws from the cover by using the Phillips

screwdriver. After removing the screws, slide the cover

away to remove it.

Important

Keep the removed screws in a safe place. They will be used

when re-attaching the cover to the instrument after installing

the DIMMs.

Compatible DIMMs

DIMM Type and DIMM Conﬁguration

64MB x 2 = 128MB 128MB x 2 = 256MB

256MB x 2 = 512MB 512MB x 2 = 1GB

DIMM Installation

View of the keyboard from the bottom

Place supports at all four corners, taking care

not to touch the Knobs, Wheels and Sliders.

CAUTION

↑ Rear side

Bottom

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF XS8 Seite 295

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF XS8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info