Bedienungsanleitung Yamaha MOTIF6 (Seite 5 von 300) (Englisch)

571287

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

(2)-8

2/2

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum. Also, be sure to set the volumes of all

components at their minimum levels and gradually raise the volume controls

while playing the instrument to set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,

solvents, cleaning ﬂuids, or chemical-impregnated wiping cloths.

• Do not insert a ﬁnger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel or

keyboard. If this happens, turn off the power immediately and unplug the power

cord from the AC outlet. Then have the instrument inspected by qualiﬁed Yamaha

service personnel.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not operate the instrument for a long period of time at a high or uncomfortable

volume level, since this can cause permanent hearing loss. If you experience any

hearing loss or ringing in the ears, consult a physician.

• This instrument has a built-in lithium backup battery. When you unplug the power

cord from the AC outlet, the SRAM data (see page 63) is retained. However, if the

backup battery fully discharges, this data will be lost. When the backup battery is

running low, the LCD display indicates “Change internal battery.” In this case,

immediately save the data to a Memory Card (SmartMedia)/a SCSI disk then have

qualiﬁed Yamaha service personnel replace the backup battery.

Saving and backing up your data

For instruments with DRAM (RAM that does not retain data)

• DRAM data (see page 63) is lost when you turn off the power to the instrument.

Save the data to a Memory Card (SmartMedia)/a SCSI disk.

For instruments with SRAM (RAM that retains data by using a lithium

battery)

• SRAM data (see page 63) is retained when the power is turned off, as long as the

backup battery retains a charge. However, the data could be lost due to

malfunction or incorrect operation. Save important data to a Memory Card

(SmartMedia)/a SCSI disk.

Backing up the Memory Card (SmartMedia)/SCSI disk

•To protect against data loss through media damage, we recommend that you save

your important data onto twoMemory Cards (SmartMedia)/SCSI disk.

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

Make sure to discard used batteries according to local regulations.

Connections

Maintenance

Handling caution

Backup battery

Saving data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF6 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info