Bedienungsanleitung Yamaha MOTIF6 (Seite 1 von 2) (Englisch)

571287

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

New Functions in MOTIF6/MOTIF7/MOTIF8 Version 1.7

Yamaha has updated the ﬁrmware of the MOTIF6/MOTIF7/MOTIF8 as Version 1.7. This version provides the additional functions

listed below.

■

Zone Switch setting in the Master mode

Owner’s Manual on page 270

In the previous version of the MOTIF, the Zone Switch setting (page 270) in the Master mode (page 268) was available only when the

Mode is set to “Voice” or “Performance.” Version 1.7 lets you set the Zone Switch parameter also when the Mode is set to “Song” or

“Pattern.” This means that you can use the MOTIF as a master keyboard for controlling up to four zones in the Song and Pattern modes

as well (even when the tone generator block is set to Multi Timbral mode). This allows you to create powerful and versatile live

performance setups by connecting another MOTIF or an external tone generator.

■

Loading speciﬁc Performances from the Memory Card or a SCSI device connected to the MOTIF

Owner’s Manual on page 263

In the previous version, you could only load and save all 128 MOTIF Performances as a group. In the new version, the MOTIF lets you

load a speciﬁc Performance from a ﬁle (which has been saved as “All” to internal memory).

■

Optional menu addition when converting from a Pattern Chain to a Song

Owner’s Manual on page 221

On the “Convert to Song” display in the Pattern Chain Edit mode, an optional menu item has been added, letting you determine whether

Program Change messages are copied or not.

●

When the Meas is set to “001” or the destination song has no data:

When the box is not check marked: ...The Pattern Mixing data at the earliest timing on the CHANGE display is copied or

overwritten to the destination song and the program change of the pattern is entered

to the top measure (speciﬁed at “Meas”) of the destination song.

When the box is check marked:..........The Pattern Mixing data at the earliest timing on the CHANGE display is copied or

overwritten to the destination song and the program change of the pattern is not

copied to the destination song.

●

When the destination song has data and the Meas is set to a value other than “001”:

The Pattern Mixing and the program change are not copied from the Pattern Chain to the destination song regardless of the

“ without PC” setting.

The ZoneSwitch setting is now available when Mode is set to “Song” or

“Pattern,” in addition to “Voice” and “performance.”

"Performance" becomes available as the ﬁle type to be loaded.

This type lets you load a speciﬁc Performance to the internal memory of the MOTIF.

n If the Performance you are loading has been assigned

a user voice, the resulting sound may not be as

expected. If this occurs, make sure that the

appropriate user voice is also loaded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF6 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info