Bedienungsanleitung Yamaha MOTIF7 (Seite 3 von 300) (Englisch)

571288

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,

AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.

WARNING-

When using any electrical or electronic product,

basic precautions should always be followed. These precautions

include, but are not limited to, the following:

Read all Safety Instructions, Installation Instructions, Special

Message Section items, and any Assembly Instructions found in

this manual BEFORE making any connections, including

connection to the main supply.

Do not attempt to service this product beyond that

described in the user-maintenance instructions. All other servicing

should be referred to qualified service personnel.

Main Power Supply Verification: Yamaha products are

manufactured specifically for the supply voltage in the area where

they are to be sold. If you should move, or if any doubt exists about

the supply voltage in your area, please contact your dealer for

supply voltage verification and (if applicable) instructions. The

required supply voltage is printed on the name plate. For name

plate location, please refer to the graphic found in the Special

Message Section of this manual.

DANGER

-Grounding Instructions: This product must be

grounded and therefore has been equipped with a three pin

attachment plug. If this product should malfunction, the ground pin

provides a path of low resistance for electrical current, reducing the

risk of electrical shock. If your wall socket will not accommodate this

type plug, contact an electrician to have the outlet replaced in

accordance with local electrical codes. Do NOT modify the plug or

change the plug to a different type!

WARNING

: Do not place this product or any other objects

on the power cord or place it in a position where anyone could walk

on, trip over, or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! If you must

use an extension cord, the minimum wire size for a 25’ cord (or less)

is 18 AWG. NOTE: The smaller the AWG number, the larger the

current handling capacity. For longer extension cords, consult a

local electrician.

Ventilation: Electronic products, unless specifically

designed for enclosed installations, should be placed in locations

that do not interfere with proper ventilation. If instructions for

enclosed installations are not provided, it must be assumed that

unobstructed ventilation is required.

Temperature considerations: Electronic products should be

installed in locations that do not seriously contribute to their

operating temperature. Placement of this product close to heat

sources such as; radiators, heat registers etc., should be avoided.

This product was NOT designed for use in wet/damp

locations and should not be used near water or exposed to rain.

Examples of wet /damp locations are; near a swimming pool, spa,

tub, sink, or wet basement.

This product should be used only with the components

supplied or; a cart ,rack, or stand that is recommended by the

manufacturer. If a cart, rack, or stand is used, please observe all

safety markings and instructions that accompany the accessory

product.

10.

The power supply cord (plug) should be disconnected from

the outlet when electronic products are to be left unused for

extended periods of time. Cords should also be disconnected when

there is a high probability of lightning and/or electrical storm

activity.

11.

Care should be taken that objects do not fall and liquids are

not spilled into the enclosure through any openings that may exist.

12.

Electrical/electronic products should be serviced by a

qualified service person when:

a. The power supply cord has been damaged; or

b. Objects have fallen, been inserted, or liquids have been

spilled into the enclosure through openings; or

c. The product has been exposed to rain; or

d. The product does not operate, exhibits a marked change

in performance; or

e. The product has been dropped, or the enclosure of the

product has been damaged.

13.

This product, either alone or in combination with an amplifier

and headphones or speaker/s, may be capable of producing sound

levels that could cause permanent hearing loss. DO NOT operate

for a long period of time at a high volume level or at a level that is

uncomfortable. If you experience any hearing loss or ringing in the

ears, you should consult an audiologist.

IMPORTANT

: The louder the sound, the shorter the time period

before damage occurs.

14.

Some Yamaha products may have benches and/or

accessory mounting fixtures that are either supplied as a part of the

product or as optional accessories. Some of these items are

designed to be dealer assembled or installed. Please make sure

that benches are stable and any optional fixtures (where

applicable) are well secured BEFORE using. Benches supplied by

Yamaha are designed for seating only. No other uses are

recommended.

PLEASE KEEP THIS MANUAL

IMPORTANT SAFETY INSTRUCTIONS

92-469-3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF7 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info