Bedienungsanleitung Yamaha MOTIF8 (Seite 18 von 300) (Englisch)

571289

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

MOTIF The Controls & Connectors

Rear Panel

The Control & Connectors

1 POWER Switch (page 29)

Press to turn power ON or OFF.

2 AC Power Cord Socket (page 20)

Be sure the plug the AC power cord into this socket

before plugging the power cord into an AC outlet.

Use only the AC power cord supplied with the

MOTIF. If the supplied cord is lost or damaged and

needs to be replaced, contact your Yamaha dealer.

The use of an inappropriate replacement can pose a

ﬁre and shock hazard!

3 mLAN expansion board (mLAN8E) or I/O

expansion board (AIEB2) cover (page 22)

Either the mLAN expansion board (mLAN8E) or

the I/O expansion board (AIEB2) sold separately

can be installed to the MOTIF.

With the mLAN8E board, you can conveniently

and easily hook up your MOTIF to other mLAN-

compatible instruments or devices. The AIEB2

board gives you additional digital I/O options,

featuring both optical and coaxial connectors.

Moreover, the board also includes three stereo

ASSIGNABLE OUTPUT pairs (six analog jacks).

4 OPTICAL OUT connectors (page 22)

For output of digital audio, via optical ﬁber cables

(at 44.1kHz).

5 USB connector (page 25)

For connection to a computer having a USB

interface. The USB interface provides multi-port

MIDI operation not possible with a single MIDI

connection.

n The USB connection can only be used for transfer of

MIDI data. No audio data can be transfered via USB.

USB

USB is an abbreviation for Universal Serial Bus. It is

a serial interface for connecting a computer with

peripheral devices, and enables much faster data

transfer (12Mbps) compared to conventional serial

port connections. Also, it allows “hot swapping”

(connecting peripheral devices while the power to

the computer is on).

6 MIDI IN/OUT/THRU connectors (page 24)

MIDI IN is for receiving control or performance

data from another MIDI device, such as an external

sequencer.

MIDI THRU is simply for redirecting any received

MIDI data (via MIDI IN) to connected devices,

allowing convenient chaining of additional MIDI

instruments.

MIDI OUT is for transmitting all control,

performance and playback data from the MOTIF to

another MIDI device, such as an external sequencer.

7 BREATH Controller Jack (page 28)

Connect an optional Yamaha BC2 Breath Controller

here for expressive breath control capability.

8 FOOT SWITCH jacks (page 28)

For connection of optional FC4 or FC5

Footswitches. When connected to the SUSTAIN

jack, the Footswitch controls sustain. When

connected to ASSIGNABLE, it can control one of

various different assignable functions.

9 FOOT CONTROLLER jacks (page 28)

For connection of optional foot controllers (FC7,

etc.). Each jack lets you continuously control one of

various different assignable functions — such as

volume, tone, pitch, or other aspects of the sound.

) ASSIGNABLE OUT L and R jacks (page 21)

Line level audio signals are output from the MOTIF

via these phone jacks (1/4" mono phone plug).

These outputs are independent of the main output

(at the L/MONO and R jacks below), and can be

freely assigned to any of the Parts. This lets you

route speciﬁc Voices or sounds for processing with a

favorite outboard effect unit.

! OUTPUT L/MONO and R jacks (page 21)

Line level audio signals are output via these phone

jacks. For monophonic output, use just the L/

MONO jack.

@ PHONES jack (page 21)

For connection to a pair of stereo headphones.

# A/D INPUT jacks (page 23)

External audio signals can be input via these phone

jacks. These are used primarily for recording

samples — either with a microphone, making the

proper Utility settings (page 250), or from other

audio equipment, such as a CD or MD player. With

the optional Vocal Harmony Plug-in board

(PLG100-VH, page 35), you can also apply special

effects and harmonies to the microphone input.

$ GAIN knob

For adjusting the input gain of the audio at the A/D

INPUT jacks (above). Depending on the connected

device (microphone, CD player, etc.), you may need

to adjust this for optimum level.

% SCSI connectors (page 27)

This SCSI-2 50-pin connector (D-sub, half-pitch)

can be used to connect to an external SCSI data

storage device — allowing you to conveniently save

and store large quantities of data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info