Bedienungsanleitung Yamaha MOTIF8 (Seite 34 von 300) (Englisch)

571289

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

MOTIF Basic Structure

System Overview

Basic Structure

Tone Generator block

The tone generator block is what actually produces sound in response to the MIDI messages received from the

sequencer block, the controller block, and from the MIDI IN connector or the USB connector.

The following example illustrates the signal ﬂow within a Voice.

n For details on the Voice structure, see page 40.

Internal AWM2 Tone Generator and optional Plug-in board

The tone generator block in the MOTIF consists of the built-in AWM2 and optional Plug-in units.

● AWM2(Advanced Wave Memory2)

AWM2 (Advanced Wave Memory 2) is a synthesis system based on sampled waves (sound material), and is used in

many Yamaha synthesizers. For extra realism, each AWM2 Voice uses multiple samples of a real instrument’s

waveform. Furthermore, a wide variety of envelope generator, ﬁlter, modulation, and other parameters can be

applied to the basic waveform.

You can create your own waves via microphone or from external audio equipment by using the Sampling function.

These are then stored in internal RAM and can be used just like the preseet waves.

One voice can use up to four waves (elements) in AWM2 tone generator.

n AWM2 is not just limited to general musical instruments (Normal Voices). It can also be used for setting up percussive

instruments (Drum Voices). For details on Normal and Drum Voices, see page 45.

● Plug-in board

Plug-in Boards give you an enormous amount of additional sonic ﬂexibility and power. When installed, they work

seamlessly and transparently within the system of the MOTIF — meaning that you can use their sounds and

functions just as if they were built right into the MOTIF at the factory.

The boards that are available for and can be installed to the MOTIF are described below.

Up to three Plug-in boards can be installed to the MOTIF. These boards are not simply a source of more Voices; they

are also tone generators in their own right and extend the system-level speciﬁcations such as maximum polyphony.

In addition, they allow you to use synthesis systems besides AWM2. You can play Plug-in Voices just like ordinary

internal Voices and use them as Parts in a Performance (page 42).

The MOTIF is compatible with the Modular Synthesis Plug-in System (see next page). There are three types of

Modular Synthesis Plug-in System-compatible Plug-in Boards: Single Part, Multi-Part and Effect Plug-in Board. Using

these, you can build your own system based on the sounds you require.

Voice

Osillator

See page 46 See page 47 See page 47

See page 45

Pitch

Pitch Envelope

Generator

Filter Envelope

Generator

Low Frequency

Oscillator

Amplitude Envelope

Generator

Filter Amplitude

Element 1

Element 2

Element 3

Element 4

PEG FEG

LFO

AEG

Internal AWM2

Tone Generator

Plug-in board (optional)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info