Bedienungsanleitung Yamaha MOTIF8 (Seite 222 von 300) (Englisch)

571289

222

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

222

MOTIF Reference

Pattern Record mode

Reference Pattern mode

n Please note that the time signature can be set in the

Pattern Play display. See page 217.

n The method for selecting the recording track is the

same as in Pattern track selection (page 218).

4 Change the display by pressing the [F2] - [F3]

buttons and set various parameters for recording.

5 Press the [F] button to start recording.

• When any of the Realtime recording methods

(any setting other than “step”) is selected in step

#3, your keyboard playing and controller moves

are automatically recorded.

• When “step” is selected in step #3, compose your

recording by entering each note individually.

6 After completing your performance (in Realtime

recording) or completing step recording, press the

[■] button to stop recording.

7 Press the [F] button to hear your newly

recorded phrase.

8 Save the recorded phrase data to a memory card or

a SCSI device connected to the MOTIF.

The recorded (edited) phrase data resides temporarily in

DRAM (page 64). Because data contained in DRAM is

lost when the power is turned off, you should always store

any data residing in DRAM to a memory card or an

external SCSI device before turning off the power.

• For detailed instructions on steps #3 - #4, see the

following explanations.

• For details on steps #5 - #6

, refer to “Quick Start

Guide” on page 102.

• For details on step #8

, refer to “File mode” on

page 266.

n The following explanations apply to MIDI data

recording (creating MIDI tracks). For instructions

on recording audio data (creating sample tracks),

see “Sampling mode” on page 233.

Setting up before recording

The explanations here apply to steps #3 - #4 of the

Basic Procedure on page 221, page 222.

● [F1] Pattern Record Setup

Basic Structure (page 51)

When recording type is set to something other

than “step”:

When recording type is set to “step”:

• Type (Recording type)

Determines the recording method.

❏ Settings: replace, overdub, step

n Unlike in the Song Record mode, Punch recording

is not available for pattern recording.

• Loop

Turns loop recording ON or OFF.

When ON, the phrase will play repeatedly during real-time

recording. This can be handy when recording drum parts,

allowing you to add different instruments on each pass.

When OFF recording stops after one pass through the

phrase.

❏ Settings: on, off

REC

To erase specific notes from the recording, simultaneously

hold down the [F6] button and press the note you wish to

delete. This is especially convenient when erasing specific

instruments in a selected Drum voice.

Tempo

Time signature (set in the Pattern Play display)

This lets you determine whether the Arpeggio

playback data is recorded to the Pattern track or

not. (Press the [F4] button.) When is indicated,

the Arpeggio playback data is recorded to the

Song track.

This lets you turn the click sound

(metronome) on/off for recording.

(Press the [F5] button.) When

is indicated, the click sounds.

TempoTime signature

(set in the Pattern Play display).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 222

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info