Bedienungsanleitung Yamaha MOTIF8 (Seite 246 von 300) (Englisch)

571289

246

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

246

MOTIF Reference

Sampling Job mode

Reference Sampling mode

• Type

Determines which channel, or both channels, of the stereo

sample will be converted to a mono sample.

❏ Settings

L+R>mono

The left and right channels of the stereo sample are mixed

and converted to a mono sample.

L>mono

The left channel of the stereo sample is converted to a

mono sample.

R>mono

The right channel of the stereo sample is converted to a

mono sample.

● [F1]-11 Loop-Remix

This Job lets you automatically cut the sample into

separate “slices” and randomly rearrange the slices

for special effects and unusual rhythmic variations.

A variety of audio transform operations are also

included for even greater changes in the sound.

• Type

Determines the degree to which the looped portion of the

sample will be sliced.

❏ Settings 1~4

• Variation

Determines how the original sample is varied by the this

Job.

❏ Settings

normal1, 2

These settings slice and rearrange the sample data,

without performing any other audio changes.

everse1, 2

In addition to slicing and rearranging, these settings

reverse the playback of some of the slices.

● [F1]-12 Slice

This Job lets you divide the sample into separate

“slices,” the number of which is determined by the

note length (with Measure, Meter, and SubDivide).

When entering this Job from the Song/Pattern

mode, note data for playing the slices in sequence is

also created. (Keep in mind that the results of this

Job vary depending on the previously selected

mode: Voice/Performance or Song/Pattern.)

With the exception of the parameter below, all

parameters and settings are the same as in the Slice

display of the Sampling Record mode (page 238).

• Lowest Key

Speciﬁes the lowest key number from which the sliced

samples are ordered.

❏ Settings C - 2 ~G8

n In the Slice display of the Sampling Record mode

(page 238), this parameter is ﬁxed to “C-1” for the

MOTIF6, “E0” for the MOTIF7, “A-1” for the

MOTIF8, and cannot be set.

Set the Waveform and Key Bank containing the

sample to be Loop-remixed.

Press the [ENTER]

button to

execute the Job.

Press the [F6] (OK) button to assign the

Loop-remixed sample to the specified Key Bank.

Press the [ENTER] button to execute the operation.

If you re not satisfied with the results, change the Type

and Variation values and press the [ENTER] button again.

This automatically reverts back to the original settings and

executes the operation again with the new settings.

Press the [F5] (CANCEL) button to

cancel the operation.

Set the Waveform and Key Bank containing the

sample to be sliced.

Press the [ENTER]

button to execute

the Job.

Press the [F6] (OK) button to assign the sliced

sample to the specified Key Bank.

Press the [ENTER] button to execute the operation. If

you re not satisfied with the results, edit the various

parameters and press the [ENTER] button again. This

automatically reverts back to the original settings and

executes the operation again with the new settings.

Press the [F5] (CANCEL) button to

cancel the operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 246

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info