Bedienungsanleitung Yamaha MOTIF8 (Seite 254 von 300) (Englisch)

571289

254

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

254

MOTIF Reference

Utility mode

Reference Utility mode

• Freq (Frequency)

Set the center frequency. Frequencies around this point

are attenuated/boosted by the Gain setting.

❏ Settings

LOW (Low range) Peaking 63Hz ~ 2.0kHz

Shelving 32Hz ~ 2.0kHz

LOW MID (Low middle range)

100Hz~10kHz

MID (Middle range)100Hz~10kHz

HIGH MID (High middle range)

100Hz ~10kHz

HIGH (High range)500Hz~16kHz

• Gain

Determines the level gain for the Frequency (set above), or

the amount the selected frequency band is attenuated or

boosted.

❏ Settings -12dB~0dB~+12dB

• Q (Frequency Characteristic)

This varies the signal level at the Frequency setting to

create various frequency curve characteristics.

❏ Settings 0.1~12.0

● [F3]-[SF2] Voice Arpeggio Channel

From this display you can set parameters related to

output of the Arpeggio MIDI data.

• OutputSwitch

This enables or disables MIDI data output for the

Arpeggio function. When this is set to “on,” Arpeggio

data is sent via MIDI — allowing you to send the Arpeggio

data to an external sequencer or play back the Arpeggios

on connected MIDI tone generators.

❏ Settings on (enable), off (disable)

• TransmitCh (Transmit channel)

Determines the MIDI channel through which Arpeggio

playback data will be sent (when Output Switch above is

on).

❏ Settings 1~16

● [F3]-[SF3] Voice Controller Assign

Sets the parameters related to the controllers in the

Voice mode.

Details about each parameter are same as in

Performance Common Edit. See page 169 .

❏ Settings off, 0~95

[F3] Sequencer settings

These special song- and pattern-related settings are

available only when entering the Utility mode from the

Song or Pattern mode.

● [F3]-[SF1] Sequencer Click (MIDI Click)

From this display you can set the parameters related

to the click sound (metronome) that is used during

recording or playback in the Song/Pattern mode.

• Mode

Determines whether and when the metronome click will

sound.

❏ Settings off, rec, rec/play, all

off

The click will not sound.

The click will sound during recording only.

ec/play

The click will sound during recording and playback.

all

The click will always sound.

• Beat

Determines on which beats the metronome click will

sound.

❏ Settings 16 (16th notes), 08 (8th notes), 04 (quarter

notes), 02 (half notes), 01 (whole notes)

• Volume

Determines the click sound volume.

❏ Settings 0~127

• Rec Count

Sets the number of count-in measures provided before

actually recording starts after pressing the [F] button in

the Record standby mode .

❏ Settings off (Recording starts as soon as the [F]

button is pressed ), 1meas~8meas

n Since the click sound is created with the internal

tone generator, using click playback affects the

overall polyphony of the MOTIF.

Knob Assign 1, 2

Foot Controller 1, 2

Breath Controller

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 254

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info