Bedienungsanleitung Yamaha MOTIF8 (Seite 272 von 300) (Englisch)

571289

272

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

272

MOTIF Reference

Master Edit mode

Reference Master mode

• TransmitCh (Transmit Channel)

Determines the MIDI Transmit Channel for each zone.

❏ Settings 1~16

• TGSwitch (Tone Generator Switch)

Determines whether or not to transmit MIDI messages for

each zone to each Part’s tone generator block.

❏ Settings on, off

• MIDISwitch

Determines whether or not to transmit MIDI messages for

each zone to an external MIDI device via the MIDI or USB

terminal.

❏ Settings on, off

● [F2] Zone Note

From this display you can set the pitch- and

keyboard-related parameters for each zone —

allowing you to set up zone splits and determine the

pitch range for each zone.

• Octave

Determines the amount in octaves by which the range of

the zone is shifted up or down.

❏ Settings -3~0 (Default)~+3

• Transpose

Determines the amount in semitones by by which the

range of the zone is shifted up or down.

❏ Settings -11 ~ 0 (Default) ~ +11

• NoteLimit H, L (High, Low)

Determines the lowest and highest notes of the range for

each zone. The selected zone will sound only when you

play notes within this range.

❏ Settings C -2 ~G8

n You can also set the range directly from the

keyboard, by holding down the [INFORMATION]

button and pressing the desired low and high keys.

● [F3] Zone Transmit Switch

From this display you can set how the playing of

each individual zone affects transmission of various

MIDI data, such as Control Change and Program

Change messages. When the relevant parameter is

set to “on,” playing the selected zone will transmit

the corresponding MIDI data.

Note that two different display types are provided

(see below). Each display type features the same

settings in a different format; use the type you feel

most comfortable with.

• This display type shows the Transmit Switch

status for all of the zones.

Set the desired zone on or off, for the corresponding MIDI

data type. Keep in mind that since all the available

parameters cannot be simultaneously displayed, you will

need to use the cursor controls to scroll the display in

order to see and set the other parameters.

• This display type shows all of the Transmit

Switch settings for a single selected zone.

Set the desired MIDI data type on or off for the selected

zone. To select other zone, use the NUMBER [1] - [4] buttons

(making sure that the [TRACK SELECT] button is on).

● [F4] Zone Preset

From this display you can make the voice-related

settings for each zone, in the selected Master program

number. In this way, selecting a different Master

automatically calls up a completely different set of

voices and voice-related setttings for the four zones.

• BankMSB, BankLSB, PgmChange (Program

Change)

Determines the voice assignment for each zone in the

selected Master.

❏ Settings Refer to the Voice List in the separate Data

List booklet.

• Volume

Determines the output level of each zone.

❏ Settings 0~127

• Pan

Determines the stereo pan position of each zone.

❏ Settings L64 (Left) ~ C (Center) ~ R63 (Right)

[SF5] button [SF5] button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 272

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info