Bedienungsanleitung Yamaha MOTIF8 (Seite 281 von 300) (Englisch)

571289

281

Zoom out

Zoom in

Vorherige Seite

1/300

Nächste Seite

281

MOTIF Appendix

Installing Optional Hardware

Appendix

Installing Optional Hardware

◆ Optional units that can be installed to the MOTIF

The following optional units can be installed to the MOTIF.

◆ Locations to which the optional units are installed

Up to three boards can be installed to the rear panel.

◆ Installation Precautions

Before installing the optional hardware, make sure you have a Philips screwdriver.

• Before beginning installation, switch off the power to the MOTIF and connected peripherals, and unplug them from the power outlet.

Then remove all cables connecting the MOTIF to other devices. (Leaving the power cord connected while working can result in electric

shock. Leaving other cables connected can interfere with work.)

• Be careful not to drop any screws inside the instrument during installation (this can be prevented by keeping the optional units and

cover away from the instrument while attaching). If this does happen, be sure to remove the screw(s) from inside the unit before turning

the power on. Loose screws inside the instrument can cause improper operation or serious damage. If you are unable to retrieve a

dropped screw, consult your Yamaha dealer for advice.

• Install the optional units carefully as described in the procedure below. Improper installation can cause shorts which may result in

irreparable damage and pose a ﬁre hazard.

• Do not disassemble, modify, or apply excessive force to board areas and connectors on optional units. Bending or tampering with boards

and connectors may lead to electric shock, ﬁre, or equipment failures.

• Before handling the optional units, you should brieﬂy touch the metal surface to which the optional unit cover is attached (or other such

metallic area — be careful of any sharp edges) with your bare hand so as to drain off any static charge from your body. Note that even a

slight amount of electrostatic discharge may cause damage to these components.

• It is recommended that you wear gloves to protect your hands from metallic projections on optional units and other components.

Touching leads or connectors with bare hands may cause ﬁnger cuts, and may also result in poor electrical contact or electrostatic

damage.

• Handle the optional units with care. Dropping or subjecting them to any kind of shock may cause damage or result in a malfunction.

• Be careful of static electricity. Static electricity discharge can damage the IC chips on the Plug-in board. Before you handle the optional

Plug-in board, to reduce the possibility of static electricity, touch the metal parts other than the painted area or a ground wire on the

devices that are grounded.

• Do not touch the exposed metal parts in the circuit board. Touching these parts may result in a faulty contact.

• When moving a cable, be careful not to let it catch on the circuit Plug-in board. Forcing the cable in anyway may cut the cable, cause

damage, or result in a malfunction.

• Be careful not to misplace any of the screws since all of them are used.

• Do not use any screws other than what are installed on the instrument.

● Plug-in Boards ● AIEB 2 or mLAN8E ● SIMM

Plug-in Board cover

MOTIF6 MOTIF7 MOTIF8

● Plug-in Boards

Plug-in Board cover

MOTIF6 MOTIF7

MOTIF8

● AIEB2, mLAN8E, SIMM

Bottom cover for optional units Bottom cover for optional units Bottom cover for

AIEB2, mLAN8E, SIMM

Rear cover for the

AIEB2 or mLAN8E

Rear cover for the

AIEB2 or mLAN8E

Rear cover for the

AIEB2, mLAN8E, SIMM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOTIF8 Seite 281

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOTIF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info