Bedienungsanleitung Yamaha MOX6 (Seite 42 von 76) (Englisch)

571302

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

MOX6/MOX8 Owner’s Manual

Quick Guide

5 Press ARP [EDIT] or [F3] ARP ED  [F3] MAIN,

then set the Switch parameter to “on” and set the

“VoiceWithARP” parameter to “off.”

With the “Switch” parameter “on,” the Arpeggio of Track 3

can be played back.

If the “VoiceWithARP” parameter is set to “on,” selecting the

Arpeggio Type will change the Voice from the one selected

in step 4. This is why you should set the “VoiceWithARP”

parameter to “off” here.

6 Press [F2] TYPE  [SF1] ARP1, then assign the

Arpeggio Type to the [SF1] ARP1 button.

On this display, set the parameters as below:

• “Bank” = “Pre”

• “Category” = “Seq”

• “SubCategory” = “Genrl”

• “Type” = “6223”

If desired, assign different Arpeggio Types to the [SF2] –

[SF6] buttons.

7 Press the [REC] button to return to the Song

Record display.

8 Press the [P] (Top) button to move to the top of

the Song then press the [F] (Play) button to start

recording.

The [F] (Play) button lamp lights and “RECORDING”

appears at the top of the display, indicating that the

Recording has already started. After the one-measure lead-

in count is finished, play the following notation.

NOTE

All the notes generated via Arpeggio playback will be

recorded.

9 After playing the above notation, press the [J]

(Stop) button to stop recording.

If you play any wrong notes, press the [J] (Stop) button,

then try recording again. Repeat as often as necessary until

you get it right.

10 Press the [

] (Top) button, followed by the [F]

(Play) button to hear the recorded data.

The recorded data of Tracks 1, 2 and 3 will be played back.

To stop playback, press the [J ] (Stop) button. If you are not

satisfied with the recorded data, try this operation again.

Correcting wrong notes

If you’ve played any wrong notes while recording and wish to

correct them, press the [EDIT] button from the Song Play

mode to go to the Song Edit mode. Song Edit lets you clean

up and edit data of already recorded Songs or insert new

data to the Songs. Check for any mistakenly recorded or

wrong events on the event list display of the Song Edit mode,

then correct them as needed.

1 With the recorded Song selected, press the [EDIT]

button to enter Song Edit, then press the [F1]

CHANGE button.

The CHANGE display appears.

2 Press the desired Track number button (from [1] –

[3]).

The list of the MIDI events recorded to the selected Track in

the previous section appears on the display.

NOTE

The Song location at which you edit or input the event is

indicated by measure, beat and clock. A quarter note (one

beat when the time signature is set to “4/4”) consists of 480

divisions. The length of each note (gate time) is indicated by

Beat and Clock. For example, 001:000 is equivalent to a

quarter note and 000:240 is equivalent to an eighth note.

3 Use the Cursor buttons to move the cursor to the

location to be edited, then turn the [DATA] dial to

edit the value.

When you change the value at the current line, the entire line

starts flashing.

4 Before moving the cursor to another line, press

the [ENTER] button to fix the value.

The edited event line stops flashing.

5 As necessary, correct the other data.

If you find unnecessary notes (not described on the notation),

move the cursor to the corresponding position then press

the [F6] DELETE button.

6 After completing editing, press the [EXIT] button

to return to the Song Play display.

To confirm the recorded data, press the [P] (Top) button,

followed by the [F] (Play) button to start playback. To stop

playback, press the [J] button.

Location Notes Gate time Velocity

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOX6 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOX6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info