Bedienungsanleitung Yamaha MOX6 (Seite 47 von 76) (Englisch)

571302

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

MOX6/MOX8 Owner’s Manual

Quick Guide

9 Press the [F] (Play) button to hear the recorded

Phrase.

If necessary, adjust the octave setting or velocity setting of

the guitar part by using the [F2] NOTE Jobs. For details

about the available parameters, see the “Reference

Manual” PDF document.

NOTICE

If a specific Phrase is assigned to various Sections/Tracks, keep in

mind that editing the Phrase will change the playback sound of all

Sections/Tracks that use this Phrase.

10 Press [STORE]  [F1] SEQ  [ENTER] to store the

recorded Phrases as a Pattern.

This operation will store all the Song/Patterns.

After recording Section B, create other Sections as desired.

As in the Song mode, you can also use Step Recording to

create Patterns.

Creating a Pattern Chain for

converting to a Song

In these instructions you’ll learn how to assign each of the

created Pattern Phrases to the Section, arrange the Sections

in your favorite order to create the Pattern Chain, and

convert the Pattern Chain to a Song. This converted Song

data can be used as backing accompaniment for melody

recording.

This section explains how to create a Pattern Chain by

arranging the Sections in order as shown in the example

above.

1 In the PLAY display of the Pattern Play mode,

select the Pattern created in the previous section.

2 Press the [F6] CHAIN button.

3 Press the [REC] button to enter the Pattern Chain

Record mode then set the Recording Track and

Pattern tempo.

Three Pattern Chain Track types are available. The Tempo

Track lets you record tempo changes for the Chain, and the

Scene Track lets you record Track on/off changes. The Pattern

(“patt”) Track lets you record Section changes at the desired

measure points in the Song. Here, set “RecTrack” to “patt.”

4 Press the [F] (Play) button to start recording then

play the Pattern.

Change the Sections as desired. You can “play” the Section

buttons as the Pattern plays back to create a new Song.

5 Press the [J] (Stop) button to stop recording.

The instrument returns to the CHAIN display of Pattern Play.

6 Press the [F] (Play) button to play the recorded

Pattern Chain.

7 Press [STORE]  [F1] SEQ  [ENTER] to store the

recorded Pattern Chain.

This operation will store all the Song/Patterns.

8 After pressing the [EXIT] button, record the Tempo

Track then Scene Track by repeating steps 3 – 7

above.

IWhen you record the Tempo Track:

In step 3, set the RecTrack to “tempo.” In step 4, move the

cursor to the tempo column ( ) then change the tempo as

desired by using the [DATA] dial or [INC]/[DEC] buttons.

Tempo change timing will be recorded in real time to the

Tempo Track.

IWhen you record the Scene Track:

In Step 3, set the RecTrack to “scene.” In step 4, press the

[MUTE] button so that its lamp lights then turn on/off the

desired Number buttons. The change timing of the on/off

status will be recorded in real time to the Scene Track.

Creating a Pattern Chain

.......

Pattern Chain

Change the Sections as desired to create the Song you have in mind…

Section A Section B Section F Section H

Song

Section A – H

Section I – P

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOX6 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOX6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info