Bedienungsanleitung Yamaha MOX6 (Seite 51 von 76) (Englisch)

571302

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

MOX6/MOX8 Owner’s Manual

Quick Guide

3 Make sure that the USB [TO HOST] terminal of this

instrument is enabled.

Press the [UTILITY] button to call up the Utility mode, then

press the [F6] MIDI button followed by the [SF4] OTHER

button to call up the OTHER display. Set the “MIDI IN/OUT”

parameter to “USB.”

4 Set the input and output settings for audio data

and MIDI data as desired to suit your personal

preferences.

These settings can be set in the [F5] USB I/O display and

[F6] MIDI display of the Utility mode. Setting the parameters

related to the Audio data and MIDI data by using the Quick

Setup lets you instantly reconfigure the MOX6/MOX8 for

different computer/sequencer related applications by calling

up specially programmed presets. In this case, press the

[QUICK SETUP] button and then set the “SETUP.” After

making the settings, press the [ENTER] button to apply them

to the MOX6/MOX8.

NOTE

For details on the parameters set by the Quick Setup

function, see the “Reference Manual” PDF document.

5 Press the [STORE] button to store the settings to

internal memory.

Precautions when using the USB [TO HOST]

terminal

When connecting the computer to the USB [TO HOST] terminal,

make sure to observe the following points. Failing to do so risks

freezing the computer and corrupting or losing the data. If the

computer or the instrument freezes, restart the application

software or the computer OS, or turn the power to the instrument

off then on again.

NOTICE

• Use an AB type USB cable

• Before connecting the computer to the USB [TO HOST]

terminal, exit from any power-saving mode of the computer

(such as suspend, sleep, standby).

• Before turning on the power to the instrument, connect the

computer to the USB [TO HOST] terminal.

• Execute the following before turning the power to the

instrument on/off or plugging/unplugging the USB cable to/

from the USB [TO HOST] terminal.

• Quit any open application software on the computer.

• Make sure that data is not being transmitted from the

instrument. (Data is transmitted only by playing notes on

the keyboard or playing back a song.)

• While the computer is connected to the instrument, you

should wait for six seconds or more between these

operations: (1) when turning the power of the instrument off

then on again, or (2) when alternately connecting/

disconnecting the USB cable.

MIDI channels and MIDI ports

MIDI data is assigned to one of sixteen channels, and this

synthesizer is capable of simultaneously playing sixteen

separate Parts, via the sixteen MIDI channels. However, the

sixteen-channel limit can be overcome by using separate MIDI

“ports,” each supporting sixteen channels. While a single MIDI

cable is equipped to handle data over up to sixteen channels

simultaneously, a USB connection is capable of handling far

more—thanks to the use of MIDI ports. Each MIDI port can

handle sixteen channels, and the USB connection allows up to

eight ports, letting you use up to 128 channels (8 ports x 16

channels) on your computer. When connecting this instrument

to a computer using a USB cable, the MIDI ports are defined

as follows:

Port 1

The tone generator block in this instrument can recognize and

use only this port. When playing the MOX6/MOX8 as a tone

generator from the external MIDI instrument or computer, you

should set the MIDI Port to 1 on the connected MIDI device or

computer.

Port 2

This port is used to control the DAW software on the computer

from the MOX6/MOX8 by using the Remote Control feature.

Port 3

This port is used as the MIDI Thru Port. The MIDI data received

over Port 3 via the USB [TO HOST] terminal will be re-transmitted

to an external MIDI device via the MIDI [OUT] terminal. The

MIDI data received over Port 3 via the MIDI [IN] terminal will be

re-transmitted to an external device (computer, etc.) via the USB

[TO HOST] terminal.

Port 4

This port is used only for data communication of the MOX6/

MOX8 Editor. No other software or device can use this port.

Port 5

This port is used only for data communication of the MOX6/

MOX8 Remote Editor.

No other software or device can use this port. When using a

USB connection, make sure to match the MIDI transmit port

and the MIDI receive port as well as the MIDI transmit channel

and the MIDI receive channel. Make sure to set the MIDI port

of the external device connected to this instrument according

to the above information.

Audio channels

The audio signals of the MOX6/MOX8 can be output to the USB

[TO HOST] terminal and the OUTPUT [L/MONO]/[R] jacks.

When connecting to a computer, use the USB [TO HOST]

terminal. In this case, up to four audio channels (USB 1 – USB

4) are available. The output-to-channel assignments are made

in the [F5] USB I/O display of the Utility mode.

The audio signals of the MOX6/MOX8 can be input from the

USB [TO HOST] terminal and the A/D INPUT [L]/[R] jacks. Up

to two channels of audio can be input to the USB [TO HOST]

terminal. Set the output level by using the [DAW LEVEL] slider

on the MOX6/MOX8. The signals are output to the OUTPUT [L/

MONO]/[R] jack. Also, up to two audio channels can be input

to the A/D INPUT [L]/[R] jacks. The signal is sent to the A/D input

part of the MOX6/MOX8. For more details, see the “Reference

Manual” PDF document.

Yamaha MOX6 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOX6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info