Bedienungsanleitung Yamaha MOX8 (Seite 20 von 76) (Englisch)

571303

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

MOX6/MOX8 Owner’s Manual

Moving the cursor

Use these four buttons to navigate the display, moving the

cursor around the various selectable items and parameters

in the screen. When selected, the relevant item is highlighted

(the cursor appears as a dark block with inverse characters).

You can change the value of the item (parameter) at which

the cursor is located by using the [DATA] dial, [INC] and

[DEC] buttons.

Changing (editing) parameter

values

Rotating the [DATA] dial to the right (clockwise) increases

the value, while rotating it to the left (counter-clockwise)

decreases it.

Pressing the [INC] button increases a parameter value by

one step, and pressing [DEC] decreases it. Pressing and

holding either button continuously increases or decreases

the value.

For parameters with large value ranges, you can increase

the value by 10 by simultaneously holding down the [SHIFT]

button and pressing the [INC] button. To decrease by 10,

simultaneously hold down the [SHIFT] button and press the

[DEC] button.

Functions and Sub-Functions

Each mode described above contains various displays, with

various functions and parameters. To navigate your way

through these displays and select a desired function, use the

[F1] – [F6] buttons and the [SF1] – [SF6] buttons. When you

select a mode, the available displays or menus appear directly

above the buttons at the bottom of the display (as shown

below).

Depending on the currently selected mode, up to six functions

are available and can be called up with the [F1] – [F6] buttons.

Keep in mind that the available functions differ depending on

the selected mode. Depending on the currently selected

function, up to six sub-functions are available and can be

called up with the [SF1] – [SF6] buttons. Keep in mind that

the available sub-functions differ depending on the selected

function.

The example display below is called up by pressing the [F5]

LFO button then pressing the [SF1] Wave button. In this

example display, no sub-function is assigned to the [SF6]

button.

Inputting a number directly

For parameters having large value ranges, you can also

enter the value directly, using the buttons below the LCD as

a numeric keypad. When the cursor is located on such a

parameter, the [NUM] icon appears at the lower right corner

of the LCD. When the [SF6] NUM button is pressed in this

status, each digit (1 – 9, 0) is assigned to the [SF1] – [SF5]

and [F1] – [F5] buttons as shown below, allowing you to

input a number directly by using these buttons. Depending

on the selected parameter, a negative value can be input.

When such a parameter is selected and you wish to input a

negative value, press the [F6] button (to which “-” is assigned)

then use the [SF1] – [SF5] and [F1] – [F5] buttons. After

completing the number input, press the [ENTER] button to

actually enter the number and exit from this status.

Basic Operation

Decreases number Increases number

Decreases

number

Increases

number

These functions can be selected

via the corresponding button

([F1] – [F6]).

These functions can be selected

via the corresponding button

([SF1] – [SF6]).

You can use these buttons

as a numeric keypad.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOX8 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info