Bedienungsanleitung Yamaha MOX8 (Seite 50 von 76) (Englisch)

571303

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

MOX6/MOX8 Owner’s Manual

Quick Guide

Using a Connected

Computer

By connecting the MOX6/MOX8 to your computer via USB,

you can use DAW software on the computer to create your

own original songs.

NOTE The acronym DAW (digital audio workstation) refers to music

software for recording, editing and mixing audio and MIDI data.

The main DAW applications are Cubase, Logic, SONAR and

Digital Performer. Though all of these can be effectively used

with the MOX6/MOX8, we recommend using Cubase when

creating songs together with the instrument.

By connecting this instrument to a computer, you can take

advantage of the following functions and applications.

• External tone generator for DAW software and MIDI

keyboard

• Remote Controller of the DAW software

• Editing parameters from the computer (MOX6/MOX8 Editor)

Connecting to a computer

A USB cable and the Yamaha Steinberg USB Driver are

necessary to connect the MOX6/MOX8 to the computer.

Follow the instructions below. Note that both audio data and

MIDI data can be transmitted through a USB cable.

1 Download the latest Yamaha Steinberg USB Driver

from our website.

After clicking the Download button, extract the compressed

file.

http://www.global.yamaha.com/download/

NOTE

Information on system requirements is also available at the

above web site.

NOTE The Yamaha Steinberg USB Driver may be revised and

updated without prior notice. Make sure to check and

download the latest version from the above site.

2 Install the Yamaha Steinberg USB Driver to the

computer.

For instructions on installing, refer to the online Installation

Guide included in the downloaded file package. When

connecting this instrument to a computer, connect the USB

cable to the USB TO HOST of this instrument and the USB

terminal of the computer as shown below.

HINT

Splitting the sound between the MOX6/MOX8 and

an external tone generator by MIDI channel

Using the connection example shown above, you can play both

instruments and have them separately sound different parts—

for example, having your keyboard performance sound the

external instrument while the Song/Pattern plays the sounds of

the MOX6/MOX8. To use this feature, you must set the MOX6/

MOX8

’s output channel and the external tone generator’s receive

channel to the same channel number. Check the following points

after turning the power on.

When playing the keyboard in the Voice mode or

Performance mode:

Check the MIDI transmit channel with the following operation:

[UTILITY]  [F6] MIDI  [SF1] CH (channel)  “KBDTransCh.”

If necessary, change this parameter to the same number as

the MIDI Receive Channel of the external MIDI instrument. In

the Voice play or Performance play, pressing the [TRACK]

button (so that the lamp lights) can also change the MIDI

Transmit Channel of the MOX6/MOX8. When you wish to sound

only the external tone generator, set the [Master Volume] control

to “0” or set Local Control to “off” with the following operation:

[UTILITY]  [F6] MIDI  [SF2] SWITCH  “LocalCtrl” = “off.”

For information on how to set the MIDI Receive Channel of the

external MIDI instrument, refer to the owner’s manual of the

external MIDI instrument.

When playing back a Song/Pattern or playing the keyboard

in the Song mode or Pattern mode:

Check the MIDI transmit channel for each Track with the

following operation: [SONG]/[PATTERN]



[F3] TRACK



[SF1]

CHANNEL  “OUT CH.” If necessary, change this parameter

to the same number as the MIDI Receive Channel of the external

MIDI instrument. Alternately, you can set the output destination

(Internal or external MIDI tone generator) for each Track from

the following display: [SONG]/[PATTERN]  [F3] TRACK 

[SF2] OUT SW. In this case, you’ll need to set the external MIDI

tone generator to multi-timbral operation and set the MIDI

Receive Channel for each part. For details, see the owner’s

manual of the external MIDI tone generator. Alternately, you can

have your keyboard performance split and assigned to

different MIDI channels by using the Zone settings in the Master

mode (page 55).

USB terminal

USB [TO HOST] terminal

Rear panel

USB cable

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOX8 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info