Bedienungsanleitung Yamaha MOXF (Seite 56 von 80) (Englisch)

707405

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

MOXF6/MOXF8 Owner’s Manual

Quick Guide

The DAW applications Cubase, Logic Pro, SONAR and Digital

Performer can be controlled via the Remote Control mode of

the MOXF6/MOXF8.

Before you can use the Remote Control function, you’ll need

to follow the setup instructions below.

NOTE Before making the setup of DAW Remote, make sure to properly

install the Yamaha Steinberg USB Driver and the MOXF6/MOXF8

Remote Tools.

Setting up the MOXF6/MOXF8

1 Connect this instrument to the computer via a USB

cable (page 53).

2 Press the [DAW REMOTE] button to enter the

Remote mode.

3 Press the [UTILITY] button to call up the REMOTE

display of the Utility mode. Then set the “DAW

Select” to the desired DAW software.

4 Press the [STORE] button to store the settings to

internal memory.

5 Start the DAW software on the connected

computer.

Setting up the DAW software on the computer

This section explains how to set up after starting each

application.

NOTE When the cable between the MOXF6/MOXF8 and the Windows

computer is disconnected or the MOXF6/MOXF8 is turned off

accidentally, the DAW will not recognize the MOXF6/MOXF8

again even if you connect the cable again or turn the MOXF6/

MOXF8 on. If this occurs, exit the DAW software, then restart it

after setting up the MOXF6/MOXF8 and making sure the

connection is secure.

J Cubase

The settings will be completed by installing MOXF6/MOXF8

Remote Tools.

J SONAR

1 Pull down the [Options] menu and select [MIDI Devices]

to call up the “MIDI Devices” window.

2 Add “Yamaha MOXF6/MOXF8-2” to the Input Device,

then add “Yamaha MOXF6/MOXF8-2” to the Output

Device.

3 Pull down the [Options] menu and select [Control

Surfaces] to call up the Control Surface window.

4 Click the [+] button, select “Mackie Control,” then set the

Input Port to “Yamaha

MOXF6/MOXF8

-2” and set the

Output

Port to “Yamaha MOXF6/MOXF8-2.”

J Digital Performer

1 In the Audio/MIDI setup of a Mac computer, connect Port

2 of the interface of the MOXF6/MOXF8 to Port 2 of the

tone generator. When there is only one Port for the tone

generator, add the new Port, then connect it to the

interface.

Pull down the [Setup] menu and select [ControlSurface

Setup]

to call up the Control Surface window.

3 Click the [+] button.

4 Select “Mackie Control” in the Driver section.

5 In the box for setting “Unit” and “MIDI,” select “Mackie

Control” in the “Unit” section and select “MOXF6/MOXF8

New Port 2” in the “MIDI” section.

J Logic Pro

1 Select the [Preference] menu  [Control Surfaces] 

[Settings] to call up the Settings window.

2 Select the [New] menu  [Install].

3 Select “Mackie Control” in the model list, then add it as a

control surface.

MOXF6/MOXF8 Remote Tools can be downloaded from the

following Yamaha web site. For details on operating the

MOXF6/MOXF8 Remote Editor, see the PDF manual supplied

with the MOXF6/MOXF8 Remote Editor.

http://download.yamaha.com/

Remote-controlling the DAW software

For the most recent information on DAW software that can be

controlled from the MOXF6/MOXF8, see the following URL:

http://www.yamahasynth.com/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOXF Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOXF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info