Bedienungsanleitung Yamaha MOXF6 (Seite 28 von 80) (Englisch)

571309

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

MOXF6/MOXF8 Owner’s Manual

Quick Guide

NOTE This parameter is same as “Octave” and “Transpose” in the

GENERAL display of the Utility mode. Making a setting

here

automatically changes the setting of that parameter as well.

Changing the tonal qualities of the

Voice

Knobs 1 – 8 let you adjust a variety of parameters for the

current Voice, such as effect depth, attack/release

characteristics, timbre, and others. Three functions can be

assigned to each Knob, alternatively selected via the Knob

Function buttons.

1 Press the Knob Function 1 button (at the left of

Knobs 1 – 4) and Knob Function 2 button (at the left

of Knobs 5 – 8) repeatedly if necessary, so that the

lamp corresponding to the desired functions

lights.

The KNOB FUNCTION pop-up window will appear. In the pop-

display, the function currently assigned to the knob and

the current value of the function are shown. To close the pop-

window, press the [EXIT] button.

NOTE

When the “Knob FuncDispSw” is set to “off” in the Utility

GENERAL display, the KNOB FUNCTION pop-up window

will not be shown.

2 Turn a desired knob while playing the keyboard.

The KNOB FUNCTION pop-up window will appear, and the

function assigned to the knob you’re currently operating will

affect the sound of the current Voice. The KNOB FUNCTION

pop-up window shows the function assigned to the knob

you’re currently operating, the function value, and the

“Original” value. The “Original” value indicates the unedited

value (previously stored value) of the function assigned to

the knob.

Editing a Voice

“Editing” refers to the process of creating a Voice by changing

the parameters that make up the Voice. This can be done in

Voice Edit, a sub mode within the Voice mode. The actual

parameters that are available differ depending on the Voice

type.

A Normal Voice (pitched musical instrument-type sounds)

can consist of up to eight Elements. There are two types of

Voice Edit displays: Common Edit, for editing the settings

common to all eight Elements; and Element Edit, for editing

individual Elements.

NOTE An Element is the basic and the smallest unit for a Voice, and is

created by applying various parameters (Effect, EG, etc.) to the

waveform of the instrument sound. Each Voice of this instrument

consists of several Elements.

There are two types of Drum Voice Edit displays: Common

Edit, for editing the settings that apply to all Drum keys in the

Voice; and Key Edit, for editing individual keys.

Knob Function 1 button

Knob Function 2 button

Functions assigned to Knobs

1 – 4 or 5 – 8

Current values of

the functions

Unedited value (previously stored)

Knob 1 Knob 2 Knob 3 Knob 4

Knob 5 Knob 6 Knob 7 Knob 8

HINT

The Edit Indicator

When changing the value of the parameter, the Edit Indicator

will appear on the top right corner of the LCD. This gives a

quick confirmation that the current program (such as Voice and

Performance) has been modified but not yet stored. To store

the current edited status, execute the Store operation (below).

Normal Voice Edit

Drum Voice Edit

Function of currently operated Knob Current value

Unedited value (previously stored)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOXF6 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOXF6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info