Bedienungsanleitung Yamaha MOXF6 (Seite 54 von 80) (Englisch)

571309

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

MOXF6/MOXF8 Owner’s Manual

Quick Guide

Creating a Song with a computer

By using the MOXF6/MOXF8 with the DAW software on the

computer connected to the MOXF6/MOXF8, you can take

advantage of the following functions and applications.

• MIDI recording and Audio recording of the MOXF6/MOXF8

performance to the DAW software on the computer.

• Playing back a song of the DAW software by using the

MOXF6/MOXF8 tone generator

This section contains an overview on how to use DAW software

on the computer with the MOXF6/MOXF8 after connecting.

Setting up the MOXF6/MOXF8

1 If Quick Setup 1 is set to the default settings,

simultaneously hold the [QUICK SETUP] button

and press the Group [A] button.

This should be selected when recording your keyboard

performance to the DAW software on the computer. If Quick

Setup 1 is not set to the default settings, set as follows.

Audio settings

Use this setting when recording the signals from the tone

generator and the A/D INPUT [L]/[R] jacks separately to

DAW software, and playing the signals from the OUTPUT [L/

MONO]/[R] jacks directly.

MIDI settings

Use this setting when recording this instrument’s performance

(not including Arpeggio data) to the DAW software.

NOTE

For more details regarding these parameters, see the

“Reference Manual” PDF document.

Press the [STORE] button to store the settings to

internal memory.

3 Press the desired mode button for playing, and

then select the desired program for recording.

MIDI channels and MIDI ports

MIDI data is assigned to one of sixteen channels, and this

synthesizer is capable of simultaneously playing sixteen

separate Parts, via the sixteen MIDI channels. However, the

sixteen-channel limit can be overcome by using separate MIDI

“ports,” each supporting sixteen channels. While a single MIDI

cable is equipped to handle data over up to sixteen channels

simultaneously, a USB connection is capable of handling far

more—thanks to the use of MIDI ports. Each MIDI port can

handle sixteen channels, and the USB connection allows up to

eight ports, letting you use up to 128 channels (8 ports x 16

channels) on your computer. When connecting this instrument

to a computer using a USB cable, the MIDI ports are defined

as follows:

Port 1

The tone generator block in this instrument can recognize and

use only this port. When playing the MOXF6/MOXF8 as a tone

generator from the external MIDI instrument or computer, you

should set the MIDI Port to 1 on the connected MIDI device or

computer.

Port 2

This port is used to control the DAW software on the computer

from the MOXF6/MOXF8 by using the Remote Control feature.

Port 3

This port is used as the MIDI Thru Port. The MIDI data received

over Port 3 via the USB [TO HOST] terminal will be re-transmitted

to an external MIDI device via the MIDI [OUT] terminal. The

MIDI data received over Port 3 via the MIDI [IN] terminal will be

re-transmitted to an external device (computer, etc.) via the USB

[TO HOST] terminal.

Port 4

This port is used only for data communication of the MOXF6/

MOXF8 Editor. No other software or device can use this port.

Port 5

This port is used only for data communication of the MOXF6/

MOXF8 Remote Editor.

No other software or device can use this port. When using a

USB connection, make sure to match the MIDI transmit port

and the MIDI receive port as well as the MIDI transmit channel

and the MIDI receive channel. Make sure to set the MIDI port

of the external device connected to this instrument according

to the above information.

Audio channels

The audio signals of the MOXF6/MOXF8 can be output to the

USB [TO HOST] terminal and the OUTPUT [L/MONO]/[R]

jacks. When connecting to a computer, use the USB [TO

HOST] terminal. In this case, up to four audio channels (USB 1

– USB 4) are available. The output-to-channel assignments are

made in the [F5] USB I/O display of the Utility mode.

The audio signals of the MOXF6/MOXF8 can be input from the

USB [TO HOST] terminal and the A/D INPUT [L]/[R] jacks. Up

to two channels of audio can be input to the USB [TO HOST]

terminal. Set the output level by using the [DAW LEVEL] slider

on the MOXF6/MOXF8. The signals are output to the OUTPUT

[L/MONO]/[R] jack. Also, up to two audio channels can be

input

to the A/D INPUT [L]/[R] jacks. The signal is sent to the A/D

input

part of the MOXF6/MOXF8. For more details, see the

“Reference Manual” PDF document.

Recording your performance on the

MOXF6/MOXF8 to computer

Mode Direct Monitor SW

A/D In & Part Part

2StereoRec on on

Local Control off

MIDI Sync auto

Clock Out off

ARPOUTSw all off

KBDTxCh 1

TrIntSw all on

TrExtSw all on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOXF6 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOXF6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info