Bedienungsanleitung Yamaha MOXF8 (Seite 29 von 80) (Englisch)

571310

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

MOXF6/MOXF8 Owner’s Manual

Quick Guide

1 Press the [EDIT] button in the Voice mode.

2 Edit the current Voice.

I When a Normal Voice is selected:

To edit Common parameters, press the [COMMON] button.

To edit Element parameters, press the desired Element

number button from [1] – [8].

I When a Drum Voice is selected:

To edit Common parameters, press the [COMMON] button.

To edit Key parameters, press the [1] button then press the

desired note on the keyboard.

NOTE

For details about the Voice parameters, refer to the Voice

mode chapter in the Reference Manual.

3 Assign the name to the edited Voice.

On the display called via [COMMON]  [F1] GENERAL 

[SF1] NAME, enter the desired name.

4 Store your edits as a User Voice.

Press the [STORE] button to call up the Store display. Set the

destination memory then press the [ENTER] button to execute

the Store operation.

NOTE

To cancel the Store operation, press the [EXIT] button before

pressing the [ENTER] button.

NOTICE

Never attempt to turn off the power while data is being written to Flash

ROM (while an “Executing...” or “Please keep power on” message is

shown). Turning the power off in this state results in loss of all user

data and may cause the system to freeze (due to corruption of data in

the Flash ROM).

Enhancing the sound with Effects

This instrument features a wide variety of Effects, letting you

add reverb and chorus processing to the selected Voice for

your keyboard performance. Simply changing the Effect

type applied to the preset Voice lets you instantly come up

with different sounds. The instructions below explain how to

set the Effect type and the related parameters applied to the

Preset Voice then store the settings as a User Voice.

1 In the Voice Play display, select a Voice then press

the [F6] EFFECT button.

The EFFECT display of Voice Common Edit appears.

2 Select the Effect Category and Type of Insertion

Effect A.

Move the cursor to the corresponding position as shown

below then use the [INC]/[DEC] buttons or [DATA] dial.

Basic Procedure for Voice Edit

Common Edit display

Element Edit display

Key Edit display

Indicates the Common Edit display.

Indicates the display for editing Element 1.

Indicates the Key Edit display.

Select a Key here.

Store display

Destination

Bank

Destination Voice

name

Destination Voice

number

HINT

Compare function

The Compare function lets you switch between the just-edited

Voice and its original, unedited condition, allowing you to hear

how your edits affect the sound.

I In the Voice Edit mode (with the [EDIT] lamp lit):

Press the [EDIT] button so that its lamp flashes. In this status,

the Voice settings prior to editing will temporarily be reinstated

for comparison purposes. Press the [EDIT] button again to

return to the original status.

I In the Voice Store mode:

Press the [EDIT] button so that its lamp flashes. In this status,

you can hear the sound of the Voice at the storing destination.

Press the [EDIT] button again to return to the original status.

Insertion Effect A Category Insertion Effect A Type

The current parameter and its value

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOXF8 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOXF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info