Bedienungsanleitung Yamaha MOXF8 (Seite 57 von 57) (Englisch)

571310

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Troubleshooting

MOXF6/MOXF8 Editor Owner’s Manual 57

Troubleshooting

If you encounter problems such as no sound output or abnormal behavior, verify the connections before

checking the following.

Sound does not change when using the knobs or sliders.

• Is “ONLINE” indicated on the Editor window?

• Is the lamp at left of “ONLINE” indicator turned on?

If it is turned off, the settings related to communication between the MOXF6/MOXF8 and a computer may be

wrong. Check the MIDI Port setting (page 37) on the MOXF6/MOXF8 Editor, the MIDI IN/OUT parameter

setting in the MIDI display of the Utility mode on the MOXF6/MOXF8 instrument, or the cable connection

between the MOXF6/MOXF8 and the computer.

• Check the MIDI Port setting and Device No. setting (page 37).

Bulk data is not transmitted/received successfully.

• Check the same points as above such as “ONLINE” indication and MIDI Port settings.

The appropriate Port is not shown in the Setup window.

• The MIDI Port in the Setup window can be selected from the Ports specified in the Cubase series. Check the

MIDI Port settings in the Cubase series.

• When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the previously

used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the Cubase

series.

The sounds of the MOXF6/MOXF8 do not come to the Audio Mixer in the Cubase

series.

• Set up the audio ports connected the MOXF6/MOXF8 in the VSTi Setup window (page 41).

The current audio ports do not appear when clicking the [AUTO] button in the VSTi

Setup window.

• Make sure to put checkmarks to the “Display” for the current audio ports in the “Devices” menu  “Device

Setup”  “VST audio system” in the Cubase series.

Cannot be set to ONLINE or “Port Open Error” is shown.

• Check whether or not the MOXF6/MOXF8 is connected to the computer properly, and check whether or not

the power of the MOXF6/MOXF8 is turned on.

• On Windows, quit any application software which may be using the MOXF6/MOXF8 Port. If the application

software closes unexpectedly without user input, restart the computer.

“Time Out Error” or “Communication Time Out Error” is shown.

• This message appears when the computer cannot get the response from the MOXF6/MOXF8 and another

error occurs. Check whether or not the Receive Bulk parameter and the MIDI In/Out parameter of the

MOXF6/MOXF8 are set properly in the Utility display called up via [UTILITY]  [F6]  [SF2] RcvBulk or

[UTILITY]  [F6]  [SF4] MIDI IN/OUT.

The MOXF6/MOXF8 Editor may be revised and updated without prior notice.

For details and the latest information on the Editor, refer to the following URL:

http://download.yamaha.com/

C.S.G., Digital Musical Instruments Division

308MW-A0

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha MOXF8 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha MOXF8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info