Bedienungsanleitung Yamaha MX-D1 (Seite 71 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

557718

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

• To assure the finest performance, please read this manual carefully.

Keep it in a safe place for future reference.

• Install this unit in a well ventilated, cool, dry, clean place – away from

direct sunlight, heat sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top, 10 cm on the left

and right, and 10 cm on the back of this unit.

• Locate this unit away from other electrical appliances, motors, or

transformers to avoid humming sounds.

• Do not expose this unit to sudden temperature changes from cold to hot,

and do not locate this unit in a environment with high humidity (i.e. a

room with a humidifier) to prevent condensation inside this unit, which

may cause an electrical shock, fire, damage to this unit, and/or personal

injury.

• Avoid installing this unit where foreign object may fall onto this unit

and/or this unit may be exposed to liquid dripping or splashing. On the

top of this unit, do not place:

• Other components, as they may cause damage and/or discoloration

on the surface of this unit.

• Burning objects (i.e. candles), as they may cause fire, damage to this

unit, and/or personal injury.

• Containers with liquid in them, as they may fall and liquid may cause

electrical shock to the user and/or damage to this unit.

• Do not cover the top panel of this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit, and/or

personal injury.

• Do not plug in this unit to a wall outlet until all connections are

complete.

• Do not operate this unit upside-down. It may overheat, possibly causing

damage.

• Do not use force on switches, knobs and/or cords.

• When disconnecting the power cord from the wall outlet, grasp the

plug; do not pull the cord.

• Do not clean this unit with chemical solvents; this might damage the

finish. Use a clean, dry cloth.

• Only voltage specified on this unit must be used. Using this unit with a

higher voltage than specified is dangerous and may cause fire, damage

to this unit, and/or personal injury. YAMAHA will not be held

responsible for any damage resulting from use of this unit with a

voltage other than specified.

• To prevent damage by lightning, disconnect the power cord from the

wall outlet during an electrical storm.

• Do not attempt to modify or fix this unit. Contact qualified YAMAHA

service personnel when any service is needed. The cabinet should never

be opened for any reasons.

• When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the AC power plug from the wall outlet.

• Be sure to read the “TROUBLESHOOTING” section on common

operating errors before contacting the YAMAHA dealer.

• Before moving this unit, press the STANDBY/ON switch to turn off

this unit, and disconnect the AC power plug from the wall outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with

this appliance, it should be cut off and an appropriate 3 pin plug fitted. For

details, refer to the instructions described above.

Note: The plug severed from the mains lead must be destroyed, as a plug

with bared flexible cord is hazardous if engaged in a live socket outlet.

This unit is not disconnected from the AC power source as long as it

is connected to the wall outlet, even if this unit itself is turned off. This

state is called standby mode. In this state, this unit is designed to

consume a very small quantity of power.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

IMPORTANT

The wires in this mains lead are coloured in accordance with the

following code:

GREEN-and-YELLOW: Earth

BLUE: Neutral

BROWN: Live

As the colours of the wires in the mains lead of this apparatus may not

correspond with the coloured markings identifying the terminals in

your plug proceed as follows: The wire which is coloured GREEN-

and-YELLOW must be connected to the terminal in the plug which is

marked by the letter E or by the safety earth symbol or coloured

GREEN or GREEN-and -YELLOW. The wire which is coloured

BLUE must be connected to the terminal which is marked with the

letter N or coloured BLACK. The wire which is coloured BROWN

must be connected to the terminal which is marked with the letter L or

coloured RED.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot and

fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT TECHNISCHE GEGEVENS

Minimum RMS uitgangsvermogen

(1 kHz, 1,0 % THV, 4 tot 8 Ω)............... 500 W + 500 W

Dynamisch vermogen (IHF)

2/4/6/8 Ω ......................................1000/1000/850/700 W

Dempingsfactor (1 kHz, 8 Ω)meer dan 200

Ingangsgevoeligheid

UNBALANCE.............................................1,3 V/25 kΩ

BALANCE ..................................................2,2 V/10 kΩ

Frequentierespons

1 Hz tot 100 kHz................................................ ± 3,0 dB

10 Hz tot 20 kHz................................................ ± 0,5 dB

Totale harmonische vervorming (1 kHz, 10 W/8

Ω

, LPF: 20 kHz)

UNBALANCE................................ minder dan 0,002 %

BALANCE ..................................... minder dan 0,002 %

Signaal-ruis verhouding (IHF-A Netwerk, LPF: 20 kHz)

UNBALANCE..................................... meer dan 120 dB

BALANCE .......................................... meer dan 120 dB

Kanaalscheiding (5,1 kΩ afgesloten, 1 kHz)

UNBALANCE..................................... meer dan 100 dB

BALANCE .......................................... meer dan 100 dB

Modulatie ....................... PWM (Pulse Width Modulation)

Uitgang.............................SEPP (Single-Ended Push-Pull)

Voeding .................. Resonantie-type schakelende voeding

(frequentie: 88 kHz)

Stroomvoorziening

Modellen voor de VS en Canada

............................................. 120 V wisselstroom, 60 Hz

Model voor Australië........... 240 V wisselstroom, 50 Hz

Modellen voor Groot-Brittannië en Continentaal Europa

............................................. 230 V wisselstroom, 50 Hz

Model voor China ................ 220 V wisselstroom, 50 Hz

Model voor Korea................ 220 V wisselstroom, 60 Hz

Stroomverbruik......................................................... 350 W

Stroomverbruik tijdens standby .............minder dan 0,1 W

Afmetingen (B x H x D).......................435 x 75 x 437 mm

Gewicht ...................................................................10,4 kg

Wijzigingen in technische gegevens voorbehouden.

Nederlands

000MX-D1_GB_H2-3.fm Page 1 Monday, October 20, 2003 5:14 PM

Yamaha MX-D1 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info